InfiniTime/doc/gettingStarted/ota-gadgetbridge.md

40 lines
1.5 KiB
Markdown
Raw Normal View History

# Connecting to Gadgetbridge
Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device:
![Gadgetbridge 0](gadgetbridge0.jpg)
Wait for the scan to complete, your PineTime should be detected:
![Gadgetbridge 1](gadgetbridge1.jpg)
Tap on it. Gadgdetbridge will pair and connect to your device:
![Gadgetbridge 2](gadgetbridge2.jpg)
# Updating with Gadgetbridge
## Preparation
All releases of InfiniTime are available on the [release page of the GitHub repo](https://github.com/InfiniTimeOrg/InfiniTime/releases).
Release files are available under the *Assets* button.
You need to download the DFU of the firmware version that you'd like to install, for example `pinetime-mcuboot-app-dfu-1.6.0.zip`
## Gadgetbridge
Now that Gadgetbridge is connected to your PineTime, use a file browser application (I'm using Seafile to browse my NAS) and browse to the DFU file (image-xxx.zip) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer:
![Gadgetbridge 3](gadgetbridge3.jpg)
Read carefully the warning and tap **Install**:
![Gadgetbridge 4](gadgetbridge4.jpg)
Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime!
Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used.
![Gadgetbridge 5](gadgetbridge5.jpg)