Improvements to /doc/filesInReleaseNotes.md (#357)

* Update filesInReleaseNotes.md
This commit is contained in:
Itai Nelken 2021-06-12 12:06:46 +03:00 committed by GitHub
parent 8fb543f4c3
commit 2c7ad783fc
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -1,16 +1,16 @@
# Using the releases
For each new *stable* version of Pinetime, a [release note](https://github.com/JF002/InfiniTime/releases) is created. It contains a description of the main changes in the release and some files you can use to flash the firmware in your Pinetime.
For each new *stable* version of IniniTime, a [release note](https://github.com/JF002/InfiniTime/releases) is created. It contains a description of the main changes in the release and some files you can use to flash the firmware to your Pinetime.
This page describes the files from the release notes and how to use them.
**NOTE :** the files included in different could be different. This page describes the release note of [version 0.7.1](https://github.com/JF002/InfiniTime/releases/tag/0.7.1), which is the version that'll probably be pre-programmed at the factory for the next batch of Pinetime devkits.
**NOTE :** the files included in different Releases could be different. This page describes the release notes of [version 0.7.1](https://github.com/JF002/InfiniTime/releases/tag/0.7.1), which is the version that is pre-programmed for the last batches of pinetimes but will be replaced with [1.0.0](https://github.com/jF002/infiniTime/releases/tag/1.0.0) around june 2021.
## Files included in the release note
## Files included in the release notes
### Standalone firmware
This firmware is standalone, meaning that it does not need a bootloader to actually run. It is intended to be flash at offset 0, meaning it will erase any bootloader that might be present in memory.
This firmware is standalone, meaning that it does not need a bootloader to actually run. It is intended to be flashed at offset 0, meaning it will erase any bootloader that might be present in memory.
- **pinetime-app.out** : Output file of GCC containing debug symbols, useful is you want to debug the firmware using GDB.
- **pinetime-app.out** : Output file of GCC containing debug symbols, useful if you want to debug the firmware using GDB.
- **pinetime-app.hex** : Firmware in Intel HEX file format. Easier to use because it contains the offset in memory where it must be flashed, you don't need to specify it.
- **pintime-app.bin** : Firmware in binary format. When programming it, you have to specify the offset (0x00) in memory where it must be flashed.
- **pinetime-app.map** : Map file containing all the symbols, addresses in memory,...
@ -38,7 +38,7 @@ This firmware is a small utility firmware that writes the boot graphic in the ex
### Firmware with bootloader
This firmware is intended to be used with our [MCUBoot-based bootloader](../bootloader/README.md).
- **pinetime-mcuboot-app-image.hex** : Firmware wrapped into an MCUBoot image. This is **the** file that must be flashed **@ 0x8000** into flash memory. If the [bootloader](../bootloader/README.md) has been successfully programmed, it should run this firmware after the next reset.
- **pinetime-mcuboot-app-image.hex**: Firmware wrapped into an MCUBoot image. This is **the** file that must be flashed at **0x8000** into the flash memory. If the [bootloader](../bootloader/README.md) has been successfully programmed, it should run this firmware after the next reset.
The following files are not directly usable by the bootloader: