[WIP] Use IRQ in SPI driver to improve performances

src/DisplayApp/Screens/Clock.cpp

@@ -9,10 +9,10 @@ using namespace Pinetime::Applications::Screens;
 void Clock::Refresh(bool fullRefresh) {
   if(fullRefresh) {
     gfx.FillRectangle(0,0,240,240,0x0000);
-    currentChar[0] = 0;
+    currentChar[0] = 1;
-    currentChar[1] = 0;
+    currentChar[1] = 2;
-    currentChar[2] = 0;
+    currentChar[2] = 3;
-    currentChar[3] = 0;
+    currentChar[3] = 4;
     auto dummy = currentDateTime.Get();
   }
 

src/DisplayApp/Screens/Message.cpp

@@ -9,6 +9,6 @@ using namespace Pinetime::Applications::Screens;
 void Message::Refresh(bool fullRefresh) {
   if(fullRefresh) {
     gfx.FillRectangle(0,0,240,240,0xffff);
-    gfx.DrawString(120, 10, 0x0000, "COUCOU", &smallFont, false);
+    gfx.DrawString(120, 10, 0x5555, "COUCOU", &smallFont, false);
   }
 }

src/drivers/SpiMaster.cpp

@@ -4,8 +4,10 @@
 #include <algorithm>
 using namespace Pinetime::Drivers;
 
+SpiMaster* spiInstance;
 SpiMaster::SpiMaster(const SpiMaster::SpiModule spi, const SpiMaster::Parameters &params) :
         spi{spi}, params{params} {
+  spiInstance = this;
 }
 
 bool SpiMaster::Init() {
@@ -57,49 +59,17 @@ bool SpiMaster::Init() {
   NRF_SPIM0->EVENTS_ENDRX = 0;
   NRF_SPIM0->EVENTS_ENDTX = 0;
   NRF_SPIM0->EVENTS_END = 0;
-  NRF_SPI0->EVENTS_READY = 0;
+
-  NRF_SPI0->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
+  NRF_SPIM0->INTENSET = ((unsigned)1 << (unsigned)6);
+  NRF_SPIM0->INTENSET = ((unsigned)1 << (unsigned)1);
+
   NRF_SPIM0->ENABLE = (SPIM_ENABLE_ENABLE_Enabled << SPIM_ENABLE_ENABLE_Pos);
 
+  NRFX_IRQ_PRIORITY_SET(SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn,6);
+  NRFX_IRQ_ENABLE(SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn);
   return true;
 }
 
-bool SpiMaster::WriteFast(const uint8_t *data, size_t size) {
-  auto spi = reinterpret_cast<NRF_SPI_Type*>(spiBaseAddress);
-  volatile uint32_t dummyread;
-
-  if(data == nullptr) return false;
-
-  /* enable slave (slave select active low) */
-  nrf_gpio_pin_clear(pinCsn);
-
-  NRF_SPI0->EVENTS_READY = 0;
-
-  NRF_SPI0->TXD = (uint32_t)*data++;
-
-  while(--size)
-  {
-    NRF_SPI0->TXD =  (uint32_t)*data++;
-
-    /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
-    while (NRF_SPI0->EVENTS_READY == 0);
-
-    /* clear the event to be ready to receive next messages */
-    NRF_SPI0->EVENTS_READY = 0;
-
-    dummyread = NRF_SPI0->RXD;
-  }
-
-  /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
-  while (NRF_SPI0->EVENTS_READY == 0);
-
-  dummyread = NRF_SPI0->RXD;
-
-  /* disable slave (slave select active low) */
-  nrf_gpio_pin_set(pinCsn);
-
-  return true;
-}
 
 void SpiMaster::setup_workaround_for_ftpan_58(NRF_SPIM_Type *spim, uint32_t ppi_channel, uint32_t gpiote_channel) {
   // Create an event when SCK toggles.
@@ -113,41 +83,85 @@ void SpiMaster::setup_workaround_for_ftpan_58(NRF_SPIM_Type *spim, uint32_t ppi_
   NRF_PPI->CHENSET = 1U << ppi_channel;
 }
 
+
+
+void SpiMaster::irq() {
+  if(busy) {
+    if(bufferSize > 0) {
+      auto currentSize = std::min((size_t)255, bufferSize);
+
+      NRF_SPIM0->TXD.PTR = (uint32_t) bufferAddr;
+      NRF_SPIM0->TXD.MAXCNT = currentSize;
+      NRF_SPIM0->TXD.LIST = 0;
+
+      bufferAddr += currentSize;
+      bufferSize -= currentSize;
+
+      NRF_SPIM0->RXD.PTR = (uint32_t) 0;
+      NRF_SPIM0->RXD.MAXCNT = 0;
+      NRF_SPIM0->RXD.LIST = 0;
+      NRF_SPIM0->TASKS_START = 1;
+
+      return;
+    }else {
+      nrf_gpio_pin_set(pinCsn);
+      busy = false;
+    }
+  }
+}
+
 bool SpiMaster::Write(const uint8_t *data, size_t size) {
   if(data == nullptr) return false;
 
+  while(busy) {
+    asm("nop");
+  }
+
   if(size == 1) {
     setup_workaround_for_ftpan_58(NRF_SPIM0, 0,0);
+    NRF_SPIM0->INTENCLR = (1<<6);
+    NRF_SPIM0->INTENCLR = (1<<1);
+
   } else {
     NRF_GPIOTE->CONFIG[0] = 0;
     NRF_PPI->CH[0].EEP = 0;
     NRF_PPI->CH[0].TEP = 0;
     NRF_PPI->CHENSET = 0;
+    NRF_SPIM0->INTENSET = (1<<6);
+    NRF_SPIM0->INTENSET = (1<<1);
   }
 
   nrf_gpio_pin_clear(pinCsn);
-  auto spim = reinterpret_cast<NRF_SPIM_Type *>(spiBaseAddress);
 
-  while(size > 0) {
+  bufferAddr = (uint32_t)data;
-    auto currentSize = std::min((size_t)255, size);
+  bufferSize = size;
-    size -= currentSize;
+  busy = true;
+
+//  while(size > 0) {
+    auto currentSize = std::min((size_t)255, bufferSize);
     NRF_SPIM0->TXD.PTR = (uint32_t) data;
     NRF_SPIM0->TXD.MAXCNT = currentSize;
     NRF_SPIM0->TXD.LIST = 0;
 
+    bufferSize -= currentSize;
+    bufferAddr += currentSize;
+
     NRF_SPIM0->RXD.PTR = (uint32_t) 0;
     NRF_SPIM0->RXD.MAXCNT = 0;
     NRF_SPIM0->RXD.LIST = 0;
 
-    NRF_SPIM0->EVENTS_END = 0;
+    if(size != 1) {
+      NRF_SPIM0->EVENTS_END = 0;
+    }
 
     NRF_SPIM0->TASKS_START = 1;
 
+    if(size == 1) {
+      while (NRF_SPIM0->EVENTS_END == 0);
+      busy = false;
+      nrf_gpio_pin_set(pinCsn);
+    }
 
-    while (NRF_SPIM0->EVENTS_END == 0);
-  }
-
-  nrf_gpio_pin_set(pinCsn);
 
   return true;
 }

src/drivers/SpiMaster.h

@@ -2,7 +2,7 @@
 #include <cstdint>
 #include <cstddef>
 #include <array>
-
+#include <atomic>
 namespace Pinetime {
   namespace Drivers {
     class SpiMaster {
@@ -24,7 +24,7 @@ namespace Pinetime {
         SpiMaster(const SpiModule spi, const Parameters& params);
         bool Init();
         bool Write(const uint8_t* data, size_t size);
-        bool WriteFast(const uint8_t* data, size_t size);
+        bool WriteRepeat(const uint8_t *data, size_t size, int repeat);
         void setup_workaround_for_ftpan_58(NRF_SPIM_Type *spim, uint32_t ppi_channel, uint32_t gpiote_channel);
 
         void Sleep();
@@ -33,12 +33,20 @@ namespace Pinetime {
         bool GetStatusEnd();
         bool GetStatusStarted();
 
+        void irq();
+
       private:
         NRF_SPIM_Type *  spiBaseAddress;
         uint8_t pinCsn;
 
         SpiMaster::SpiModule spi;
         SpiMaster::Parameters params;
+
+        std::atomic<bool> busy {false};
+
+        uint32_t bufferAddr = 0;
+
+        size_t bufferSize = 0;
     };
   }
 }

src/main.cpp

@@ -158,6 +158,20 @@ void OnNewTime(current_time_char_t* currentTime) {
                              dayOfWeek, hour, minute, second, nrf_rtc_counter_get(portNRF_RTC_REG));
 }
 
+extern  Pinetime::Drivers::SpiMaster* spiInstance;
+void SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler(void) {
+  if(((NRF_SPIM0->INTENSET & (1<<6)) != 0) && NRF_SPIM0->EVENTS_END == 1) {
+    NRF_SPIM0->EVENTS_END = 0;
+    spiInstance->irq();
+  }
+
+
+  if(((NRF_SPIM0->INTENSET & (1<<1)) != 0) && NRF_SPIM0->EVENTS_STOPPED == 1) {
+    NRF_SPIM0->EVENTS_STOPPED = 0;
+  }
+
+  return;
+}
 int main(void) {
   displayApp.reset(new Pinetime::Applications::DisplayApp(batteryController, bleController, dateTimeController));
   logger.Init();