diff --git a/cmake-nRF5x/CMake_nRF5x.cmake b/cmake-nRF5x/CMake_nRF5x.cmake index 505f7368..e2b3c068 100755 --- a/cmake-nRF5x/CMake_nRF5x.cmake +++ b/cmake-nRF5x/CMake_nRF5x.cmake @@ -264,12 +264,12 @@ macro(nRF5x_setup) list(APPEND SDK_SOURCE_FILES "${NRF5_SDK_PATH}/components/libraries/gfx/nrf_gfx.c" - "${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_spi.c" -# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spi.c" - "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spim.c" - "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/prs/nrfx_prs.c" +# "${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_spi.c" +# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spim.c" +# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/prs/nrfx_prs.c" - "${NRF5_SDK_PATH}/components/drivers_ext/st7735/st7735.c" +# "${NRF5_SDK_PATH}/components/drivers_ext/st7735/st7735.c" + "${NRF5_SDK_PATH}/external/thedotfactory_fonts/orkney24pts.c" ) #BLE S132 diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 4d933367..5327fb1e 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -31,12 +31,16 @@ list(APPEND SOURCE_FILES Logging/NrfLogger.cpp BlinkApp/BlinkApp.cpp main.cpp + drivers/st7789.cpp + drivers/spi_master_fast.cpp ) set(INCLUDE_FILES Logging/Logger.h Logging/NrfLogger.h BlinkApp/BlinkApp.h + drivers/st7789.h + drivers/spi_master_fast.h ) nRF5x_addExecutable(pinetime-app "${SOURCE_FILES}") \ No newline at end of file diff --git a/src/drivers/spi_master_fast.cpp b/src/drivers/spi_master_fast.cpp new file mode 100644 index 00000000..7ef2b360 --- /dev/null +++ b/src/drivers/spi_master_fast.cpp @@ -0,0 +1,176 @@ + /* Copyright (c) 2015 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is confidential property of Nordic + * Semiconductor ASA.Terms and conditions of usage are described in detail + * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + * + */ + +#include "spi_master_fast.h" +#include +#include "nrf_gpio.h" +#include "nrf_delay.h" + +static SPI_config_t spi_config_table[2]; +static NRF_SPI_Type *spi_base[2] = {NRF_SPI0, NRF_SPI1}; +static NRF_SPI_Type *SPI; + +uint32_t* spi_master_init(SPI_module_number_t spi_num, SPI_config_t *spi_config) +{ + if(spi_num > 1) + { + return 0; + } + memcpy(&spi_config_table[spi_num], spi_config, sizeof(SPI_config_t)); + + /* Configure GPIO pins used for pselsck, pselmosi, pselmiso and pselss for SPI0 */ + nrf_gpio_cfg_output(spi_config->pin_SCK); + nrf_gpio_cfg_output(spi_config->pin_MOSI); + nrf_gpio_cfg_input(spi_config->pin_MISO, NRF_GPIO_PIN_NOPULL); + nrf_gpio_cfg_output(spi_config->pin_CSN); + + /* Configure pins, frequency and mode */ + spi_base[spi_num]->PSELSCK = spi_config->pin_SCK; + spi_base[spi_num]->PSELMOSI = spi_config->pin_MOSI; + spi_base[spi_num]->PSELMISO = spi_config->pin_MISO; + nrf_gpio_pin_set(spi_config->pin_CSN); /* disable Set slave select (inactive high) */ + + spi_base[spi_num]->FREQUENCY = (uint32_t)spi_config->frequency << 24; + + spi_base[spi_num]->CONFIG = spi_config->config.SPI_cfg; + + spi_base[spi_num]->EVENTS_READY = 0; + /* Enable */ + spi_base[spi_num]->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos); + + return (uint32_t *)spi_base[spi_num]; +} + +bool spi_master_tx_rx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data, uint8_t *rx_data) +{ + volatile uint32_t *SPI_DATA_READY; + uint32_t tmp; + if(tx_data == 0 || rx_data == 0) + { + return false; + } + + SPI = spi_base[spi_num]; + SPI_DATA_READY = &SPI->EVENTS_READY; + /* enable slave (slave select active low) */ + nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN); + + *SPI_DATA_READY = 0; + + SPI->TXD = (uint32_t)*tx_data++; + tmp = (uint32_t)*tx_data++; + while(--transfer_size) + { + SPI->TXD = tmp; + tmp = (uint32_t)*tx_data++; + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (*SPI_DATA_READY == 0); + + /* clear the event to be ready to receive next messages */ + *SPI_DATA_READY = 0; + + *rx_data++ = SPI->RXD; + } + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (*SPI_DATA_READY == 0); + + *rx_data = SPI->RXD; + + /* disable slave (slave select active low) */ + nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN); + + return true; +} + +bool spi_master_tx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data) +{ + volatile uint32_t dummyread; + + if(tx_data == 0) + { + return false; + } + + SPI = spi_base[spi_num]; + + /* enable slave (slave select active low) */ + nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN); + + SPI->EVENTS_READY = 0; + + SPI->TXD = (uint32_t)*tx_data++; + + while(--transfer_size) + { + SPI->TXD = (uint32_t)*tx_data++; + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (SPI->EVENTS_READY == 0); + + /* clear the event to be ready to receive next messages */ + SPI->EVENTS_READY = 0; + + dummyread = SPI->RXD; + } + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (SPI->EVENTS_READY == 0); + + dummyread = SPI->RXD; + + /* disable slave (slave select active low) */ + nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN); + + return true; +} + +bool spi_master_rx(SPI_module_number_t spi_num, uint16_t transfer_size, uint8_t *rx_data) +{ + if(rx_data == 0) + { + return false; + } + + SPI = spi_base[spi_num]; + + /* enable slave (slave select active low) */ + nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN); + + SPI->EVENTS_READY = 0; + + SPI->TXD = 0; + + while(--transfer_size) + { + SPI->TXD = 0; + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (SPI->EVENTS_READY == 0); + + /* clear the event to be ready to receive next messages */ + SPI->EVENTS_READY = 0; + + *rx_data++ = SPI->RXD; + } + + /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */ + while (SPI->EVENTS_READY == 0); + + *rx_data = SPI->RXD; + + /* disable slave (slave select active low) */ + nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN); + + return true; +} diff --git a/src/drivers/spi_master_fast.h b/src/drivers/spi_master_fast.h new file mode 100644 index 00000000..5cd4d7ae --- /dev/null +++ b/src/drivers/spi_master_fast.h @@ -0,0 +1,147 @@ + /* Copyright (c) 2015 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is confidential property of Nordic + * Semiconductor ASA.Terms and conditions of usage are described in detail + * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + * + */ + +#ifndef __SPI_MASTER_FAST_H +#define __SPI_MASTER_FAST_H + +#include +#include + +#define SPI_FAST_DEFAULT_CONFIG {.pin_SCK = 1, .pin_MOSI = 2, .pin_MISO = 3, .pin_CSN = 4, \ + .frequency = SPI_FREQ_1MBPS, .config.fields.mode = 0, .config.fields.bit_order = SPI_BITORDER_MSB_LSB} + +/** + * SPI master operating frequency + */ +typedef enum +{ + SPI_FREQ_125KBPS = 0x02, /*!< drive SClk with frequency 125Kbps */ + SPI_FREQ_250KBPS = 0x04, /*!< drive SClk with frequency 250Kbps */ + SPI_FREQ_500KBPS = 0x08, /*!< drive SClk with frequency 500Kbps */ + SPI_FREQ_1MBPS = 0x10, /*!< drive SClk with frequency 1Mbps */ + SPI_FREQ_2MBPS = 0x20, /*!< drive SClk with frequency 2Mbps */ + SPI_FREQ_4MBPS = 0x40, /*!< drive SClk with frequency 4Mbps */ + SPI_FREQ_8MBPS = 0x80 /*!< drive SClk with frequency 8Mbps */ +} SPI_frequency_t; + +/** + * SPI master module number + */ +typedef enum +{ + SPI0 = 0, /*!< SPI module 0 */ + SPI1 /*!< SPI module 1 */ +} SPI_module_number_t; + +/** + * SPI mode + */ +typedef enum +{ + //------------------------Clock polarity 0, Clock starts with level 0------------------------------------------- + SPI_MODE0 = 0, /*!< Sample data at rising edge of clock and shift serial data at falling edge */ + SPI_MODE1, /*!< sample data at falling edge of clock and shift serial data at rising edge */ + //------------------------Clock polarity 1, Clock starts with level 1------------------------------------------- + SPI_MODE2, /*!< sample data at falling edge of clock and shift serial data at rising edge */ + SPI_MODE3 /*!< Sample data at rising edge of clock and shift serial data at falling edge */ +} SPI_mode_t; + +/** + * SPI master bit ordering + */ +typedef enum +{ + SPI_BITORDER_MSB_LSB = 0, /*!< Most significant to least significant bit */ + SPI_BITORDER_LSB_MSB /*!< Least significant to most significant bit */ +} SPI_bit_order_t; + +/** + * Struct containing all parameters necessary to configure the SPI interface + */ +typedef struct +{ + union + { + uint8_t SPI_cfg; /*!< Bit mode and bit order merged, as in the SPI CONFIG register */ + struct + { + uint8_t bit_order : 1; /*!< SPI master bit order */ + uint8_t mode : 2; /*!< SPI master mode */ + uint8_t : 5; /*!< Padding */ + }fields; + }config; + uint8_t frequency; /*!< SPI master frequency */ + uint8_t pin_SCK; /*!< SPI master SCK pin */ + uint8_t pin_MOSI; /*!< SPI master MOSI pin */ + uint8_t pin_MISO; /*!< SPI master MISO pin */ + uint8_t pin_CSN; /*!< SPI master chip select pin */ +} SPI_config_t; + +/** + * Initializes given SPI master with given configuration. + * + * After initializing the given SPI master with given configuration, this function also test if the + * SPI slave is responding with the configurations by transmitting few test bytes. If the slave did not + * respond then error is returned and contents of the rx_data are invalid. + * + * @param module_number SPI master number (SPIModuleNumber) to initialize. + * @param pointer to a struct of type @ref SPIConfig_t containing the SPI configuration parameters. + * @return + * @retval pointer to direct physical address of the requested SPI module if init was successful + * @retval 0, if either init failed or slave did not respond to the test transfer + */ +uint32_t* spi_master_init(SPI_module_number_t spi_num, SPI_config_t *spi_config); + +/** + * Transmit/receive data over SPI bus. + * + * @note Make sure at least transfer_size number of bytes is allocated in tx_data/rx_data. + * + * @param spi_num SPI master number (SPIModuleNumber) + * @param transfer_size number of bytes to transmit/receive over SPI master + * @param tx_data pointer to the data that needs to be transmitted + * @param rx_data pointer to the data that needs to be received + * @return + * @retval true if transmit/reveive of transfer_size were completed. + * @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data. + */ +bool spi_master_tx_rx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data, uint8_t *rx_data); + +/** + * Transmit data over SPI bus. + * + * @note Make sure at least transfer_size number of bytes is allocated in tx_data. + * + * @param spi_num SPI master number (SPIModuleNumber) + * @param transfer_size number of bytes to transmit/receive over SPI master + * @param tx_data pointer to the data that needs to be transmitted + * @return + * @retval true if transmit/reveive of transfer_size were completed. + * @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data. + */ +bool spi_master_tx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data); + +/** + * Receive data over SPI bus. + * + * @note Make sure at least transfer_size number of bytes is allocated in rx_data. + * + * @param spi_num SPI master number (SPIModuleNumber) + * @param transfer_size number of bytes to transmit/receive over SPI master + * @param rx_data pointer to the data that needs to be received + * @return + * @retval true if transmit/reveive of transfer_size were completed. + * @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data. + */ +bool spi_master_rx(SPI_module_number_t spi_num, uint16_t transfer_size, uint8_t *rx_data); + +#endif diff --git a/src/drivers/st7789.cpp b/src/drivers/st7789.cpp index 6e2fb68b..a4d06266 100644 --- a/src/drivers/st7789.cpp +++ b/src/drivers/st7789.cpp @@ -1,5 +1,168 @@ -// -// Created by jf on 12/2/19. -// - +#include +#include #include "st7789.h" +#include "spi_master_fast.h" + +using namespace Pinetime::Drivers; + +ret_code_t st7789::Init() { + InitHw(); + InitCommands(); + +} + +ret_code_t st7789::InitHw() const { + nrf_gpio_cfg_output(ST7735_DC_PIN); + SPI_config_t spi_config; + + spi_config.pin_SCK = ST7735_SCK_PIN; + spi_config.pin_MOSI = ST7735_MOSI_PIN; + spi_config.pin_MISO = ST7735_MISO_PIN; + spi_config.pin_CSN = ST7735_SS_PIN; + spi_config.frequency = SPI_FREQ_8MBPS; + spi_config.config.fields.mode = SPI_MODE3; + spi_config.config.fields.bit_order = SPI_BITORDER_MSB_LSB; + + + spi_master_init(SPI0, &spi_config); + + return 0; +} + +void st7789::InitCommands() { + SoftwareReset(); + SleepOut(); + ColMod(); + MemoryDataAccessControl(); + ColumnAddressSet(); + RowAddressSet(); + DisplayInversionOn(); + NormalModeOn(); + DisplayOn(); + +} + +void st7789::WriteCommand(uint8_t cmd) { + nrf_gpio_pin_clear(ST7735_DC_PIN); + WriteSpi(&cmd, 1); +} + +void st7789::WriteData(uint8_t data) { + nrf_gpio_pin_set(ST7735_DC_PIN); + WriteSpi(&data, 1); +} + + +void st7789::WriteSpi(const uint8_t* data, size_t size) { +// APP_ERROR_CHECK(nrf_drv_spi_transfer(&spi, data, size, nullptr, 0)); + spi_master_tx(SPI0, size, data); +} + +void st7789::SoftwareReset() { + WriteCommand(static_cast(Commands::SoftwareReset)); + nrf_delay_ms(150); +} + +void st7789::SleepOut() { + WriteCommand(static_cast(Commands::SleepOut)); + nrf_delay_ms(500); +} + +void st7789::ColMod() { + WriteCommand(static_cast(Commands::ColMod)); + WriteData(0x55); + nrf_delay_ms(10); +} + +void st7789::MemoryDataAccessControl() { + WriteCommand(static_cast(Commands::MemoryDataAccessControl)); + WriteData(0x00); +} + +void st7789::ColumnAddressSet() { + WriteCommand(static_cast(Commands::ColumnAddressSet)); + WriteData(0x00); + WriteData(0x00); + WriteData(Height >> 8); + WriteData(Height & 0xff); +} + +void st7789::RowAddressSet() { + WriteCommand(static_cast(Commands::RowAddressSet)); + WriteData(0x00); + WriteData(0x00); + WriteData(Width >> 8); + WriteData(Width & 0xff); +} + +void st7789::DisplayInversionOn() { + WriteCommand(static_cast(Commands::DisplayInversionOn)); + nrf_delay_ms(10); +} + +void st7789::NormalModeOn() { + WriteCommand(static_cast(Commands::NormalModeOn)); + nrf_delay_ms(10); +} + +void st7789::DisplayOn() { + WriteCommand(static_cast(Commands::DisplayOn)); + nrf_delay_ms(500); +} + +void st7789::FillRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color) { + // rudimentary clipping (drawChar w/big text requires this) + if((x >= Width) || (y >= Height)) return; + if((x + width - 1) >= Width) width = Width - x; + if((y + height - 1) >= Height) height = Height - y; + + SetAddrWindow(0+x, ST7789_ROW_OFFSET+y, x+width-1, y+height-1); + + uint8_t hi = color >> 8, lo = color; + uint32_t c = color + (color << 16); + + nrf_gpio_pin_set(ST7735_DC_PIN); + for(y=height+ST7789_ROW_OFFSET; y>ST7789_ROW_OFFSET; y--) { + for(x=width; x>0; x--) { + WriteSpi(reinterpret_cast(&c), 4); + } + } +} + +void st7789::SetAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) { + WriteCommand(static_cast(Commands::ColumnAddressSet)); + WriteData(x0 >> 8); + WriteData(x0 & 0xff); + WriteData(x1 >> 8); + WriteData(x1 & 0xff); + + WriteCommand(static_cast(Commands::RowAddressSet)); + WriteData(y0>>8); + WriteData(y0 & 0xff); + WriteData(y1 >> 8); + WriteData(y1 & 0xff); + + WriteToRam(); +} + +void st7789::WriteToRam() { + WriteCommand(static_cast(Commands::WriteToRam)); +} + +void st7789::DisplayOff() { + WriteCommand(static_cast(Commands::DisplayOff)); + nrf_delay_ms(500); +} + +void st7789::Uninit() { + +} + +void st7789::DrawPixel(uint16_t x, uint16_t y, uint32_t color) { + if((x < 0) ||(x >= Width) || (y < 0) || (y >= Height)) return; + + SetAddrWindow(x, y, x+1, y+1); + + nrf_gpio_pin_set(ST7735_DC_PIN); + WriteSpi(reinterpret_cast(&color), 2); +} diff --git a/src/drivers/st7789.h b/src/drivers/st7789.h index dc3f0833..6f744a1e 100644 --- a/src/drivers/st7789.h +++ b/src/drivers/st7789.h @@ -1,14 +1,56 @@ -// -// Created by jf on 12/2/19. -// +#pragma once -#ifndef PINETIME_ST7789_H -#define PINETIME_ST7789_H +namespace Pinetime { + namespace Drivers { + class st7789 { + public: + ret_code_t Init(); + void Uninit(); + void DrawPixel(uint16_t x, uint16_t y, uint32_t color); + void DrawRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint32_t color); + void FillRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color); + + private: + ret_code_t InitHw() const; + void InitCommands(); + + void SoftwareReset(); + void SleepOut(); + void ColMod(); + void MemoryDataAccessControl(); + void DisplayInversionOn(); + void NormalModeOn(); + void WriteToRam(); + void DisplayOn(); + void DisplayOff(); + + void SetAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1); + + void WriteCommand(uint8_t cmd); + void WriteSpi(const uint8_t* data, size_t size); + + enum class Commands : uint8_t { + SoftwareReset = 0x01, + SleepOut = 0x11, + NormalModeOn = 0x13, + DisplayInversionOn = 0x21, + DisplayOff = 0x28, + DisplayOn = 0x29, + ColumnAddressSet = 0x2a, + RowAddressSet = 0x2b, + WriteToRam = 0x2c, + MemoryDataAccessControl = 036, + ColMod = 0x3a, + }; + void WriteData(uint8_t data); + void ColumnAddressSet(); + + static constexpr uint16_t Width = 240; + static constexpr uint16_t Height = 240; + void RowAddressSet(); + + }; + } +} -class st7789 { - -}; - - -#endif //PINETIME_ST7789_H diff --git a/src/main.cpp b/src/main.cpp index c04cc843..018989b7 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -8,6 +8,7 @@ #include #include #include +#include #include "nrf_gfx.h" @@ -21,7 +22,7 @@ Pinetime::Logging::DummyLogger logger; Pinetime::Applications::BlinkApp blinkApp; TaskHandle_t systemThread; - +Pinetime::Drivers::st7789 lcd; extern "C" { void vApplicationIdleHook() { @@ -45,8 +46,48 @@ static void bsp_event_handler(bsp_event_t event) } } -extern const nrf_lcd_t nrf_lcd_st7735; -static nrf_lcd_t const * p_lcd = &nrf_lcd_st7735; +ret_code_t lcd_init() { + lcd.Init(); +} + +void lcd_dummy() { + +}; + +void lcd_pixel_draw(uint16_t x, uint16_t y, uint32_t color) { + lcd.DrawPixel(x, y, color); +} + + +void lcd_rectangle_draw(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint32_t color) { + lcd.FillRectangle(x, y, width, height, color); +} + +void lcd_rotation_set(nrf_lcd_rotation_t rotation) { + +} + +void lcd_display_invert(bool invert) { + +} + +static lcd_cb_t st7789_cb = { + .height = 240, + .width = 240 +}; + +const nrf_lcd_t nrf_lcd_st7789 = { + .lcd_init = lcd_init, + .lcd_uninit = lcd_dummy, + .lcd_pixel_draw = lcd_pixel_draw, + .lcd_rect_draw = lcd_rectangle_draw, + .lcd_display = lcd_dummy, + .lcd_rotation_set = lcd_rotation_set, + .lcd_display_invert = lcd_display_invert, + .p_lcd_cb = &st7789_cb +}; + +extern const FONT_INFO orkney_24ptFontInfo; static void gfx_initialization(void) { nrf_gpio_cfg_output(14); @@ -56,24 +97,53 @@ static void gfx_initialization(void) nrf_gpio_pin_set(22); nrf_gpio_pin_set(23); - APP_ERROR_CHECK(nrf_gfx_init(p_lcd)); + APP_ERROR_CHECK(nrf_gfx_init(&nrf_lcd_st7789)); nrf_gfx_rect_t rect; - rect.height = 10; - rect.width = 10; - rect.x = 10; - rect.y = 10; - nrf_gfx_rect_draw(p_lcd, &rect, 2, 0xffffffff, true); + rect.height = 240; + rect.width = 240; + rect.x = 0; + rect.y = 0; + nrf_gfx_rect_draw(&nrf_lcd_st7789, &rect, 2, 0xaaaaaaaa, true); + + nrf_gfx_point_t point; + point.x = 10; + point.y = 10; + + nrf_gfx_font_desc_t font; + font.charInfo = orkney_24ptFontInfo.charInfo; + font.data = orkney_24ptFontInfo.data; + font.endChar = orkney_24ptFontInfo.endChar; + font.height = orkney_24ptFontInfo.height; + font.spacePixels = orkney_24ptFontInfo.spacePixels; + font.startChar = orkney_24ptFontInfo.startChar; + + + nrf_gfx_print(&nrf_lcd_st7789, + &point, + 0xffff, + "#Pinetime\nRocks!", + &font, + true); + } void SystemTask(void *) { APP_GPIOTE_INIT(2); app_timer_init(); - bsp_board_init(BSP_INIT_LEDS|BSP_INIT_BUTTONS); - bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler); + nrf_gpio_cfg_output(14); + nrf_gpio_cfg_output(22); + nrf_gpio_cfg_output(23); + nrf_gpio_pin_clear(14); + nrf_gpio_pin_clear(22); + nrf_gpio_pin_clear(23); gfx_initialization(); - +// lcd.Init(); +// lcd.FillRectangle(0,0,240,240,0xffaa); +// lcd.FillRectangle(10,10,50,50,0x011bb); +// +// lcd.FillRectangle(120,120,120,120,0x1212); blinkApp.Start(); diff --git a/src/sdk_config.h b/src/sdk_config.h index 46a40940..057d16ba 100644 --- a/src/sdk_config.h +++ b/src/sdk_config.h @@ -4384,13 +4384,13 @@ // NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver //========================================================== #ifndef NRFX_SPIM_ENABLED -#define NRFX_SPIM_ENABLED 1 +#define NRFX_SPIM_ENABLED 0 #endif // NRFX_SPIM0_ENABLED - Enable SPIM0 instance #ifndef NRFX_SPIM0_ENABLED -#define NRFX_SPIM0_ENABLED 1 +#define NRFX_SPIM0_ENABLED 0 #endif // NRFX_SPIM1_ENABLED - Enable SPIM1 instance @@ -4435,7 +4435,7 @@ // NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRFX_SPIM_CONFIG_LOG_ENABLED -#define NRFX_SPIM_CONFIG_LOG_ENABLED 1 +#define NRFX_SPIM_CONFIG_LOG_ENABLED 0 #endif // NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level @@ -6456,7 +6456,7 @@ // SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer //========================================================== #ifndef SPI_ENABLED -#define SPI_ENABLED 1 +#define SPI_ENABLED 0 #endif // SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority @@ -6488,7 +6488,7 @@ // SPI0_ENABLED - Enable SPI0 instance //========================================================== #ifndef SPI0_ENABLED -#define SPI0_ENABLED 1 +#define SPI0_ENABLED 0 #endif // SPI0_USE_EASY_DMA - Use EasyDMA @@ -8146,7 +8146,7 @@ #endif #ifndef ST7735_ENABLED -#define ST7735_ENABLED 1 +#define ST7735_ENABLED 0 #endif // NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module @@ -9621,7 +9621,7 @@ // SPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SPI_CONFIG_LOG_ENABLED -#define SPI_CONFIG_LOG_ENABLED 1 +#define SPI_CONFIG_LOG_ENABLED 0 #endif // SPI_CONFIG_LOG_LEVEL - Default Severity level @@ -12967,6 +12967,10 @@ #define ST7735_SS_PIN 25 #endif +#ifndef ST7789_ROW_OFFSET +#define ST7789_ROW_OFFSET 0 +#endif + // ST7735_IRQ_PRIORITY - Interrupt priority