Commit graph

717 commits

Author SHA1 Message Date
Maxim Leshchenko 05f8850acf Fixes based on code reviews 2021-09-29 19:15:48 +03:00
Maxim Leshchenko d86ae69961 Alarm: Close the popup with information about the time until alarm with the back button
Previously, pressing the back button would close the alarm app anyway. Now if you press on it and the popup with information is open, it will first close and the second press will close the application
2021-09-28 22:50:09 +03:00
Daniel Jackson d7ca217872
Correctly return the tick at which the RF will be fully enabled.
Always returning 0 (when `MYNEWT_VAL_BLE_LL_RFMGMT_ENABLE_TIME` is not defined), rather than a time near to the current tick, causes an issue in at least one place: `ble_ll_adv_sm_start()`, where the calculation of `delta` overflows when the system timer is at 0x80000000 or above -- causing an incorrect, huge adjustment to be made to the scheduled time, ultimately stopping adverts from being sent.
2021-09-25 23:48:53 +01:00
JF002 8a2b86dc83
Merge pull request #664 from Riksu9000/disable_notif_only
Toggle notifications only, keep vibrations.
2021-09-23 20:13:42 +02:00
Jean-François Milants 1c3c3c8db9 Merge branch 'develop' of github.com:JF002/Pinetime into develop 2021-09-19 17:43:28 +02:00
Jean-François Milants f3b5da0049 Fix the display of the date after a reset : when the date/time was restored from the noinit area, the date was displayed as "--" instead of the actual date.
This issue was caused by DateTime::SetCurrentTime() that would not update the internal state of the class : dayOfWeek, Month, Year were not properly updated according to the current time.
2021-09-19 17:42:50 +02:00
JF002 52eb94cfc4
Merge pull request #669 from NeroBurner/fix_unsigned_comparison_warning_metronome
Fix unsigned/signed comparison warning in Metronome.cpp
2021-09-18 20:33:45 +02:00
Jean-François Milants f556003de3 Merge branch 'PersistantStorage' of git://github.com/geekbozu/InfiniTime into geekbozu-PersistantStorage
# Conflicts:
#	src/systemtask/SystemTask.cpp
2021-09-18 17:37:37 +02:00
Jean-François Milants 7af7db74cd Fix DisplayAppRecovery : add AlarmController to ctor(). 2021-09-18 17:20:33 +02:00
Mark Russell b9e56843a2 resolve conflict in src/systemtask/Messages.h 2021-09-16 16:20:39 -04:00
Mark Russell cdf99b08f4 Revert "Merge upstream"
This reverts commit 1d43adcdfa.
2021-09-16 16:12:20 -04:00
Mark Russell 1d43adcdfa Merge upstream 2021-09-16 16:01:25 -04:00
Mark Russell f857a757a7 Fixes per Riksu9000's feedback 2021-09-16 15:38:31 -04:00
Reinhold Gschweicher 63477fc096 Fix unsigned/signed comparison warning in Metronome.cpp
`xTaskGetTickCount()` returns a `TickType_t`, which is defined as an
`uint32_t`. This is compared to the `bpm` variable, which is a `int16_t`
in the range of 40 to 220 as defined in the constructor.

```cpp
  lv_arc_set_range(bpmArc, 40, 220);
```

Just assume that `bpm` is greater than 0, as this
would result in a divison by zero or negative values, which would
unintentionally underflow to a very large number.
2021-09-16 10:47:09 +02:00
Riku Isokoski 93d240a23b
Merge branch 'develop' into disable_notif_only 2021-09-14 23:38:42 +03:00
Reinhold Gschweicher f89780f332 Remove unused include in MotoController.h
Remove the unused include `app_timer.h` in `MotorController.h`
2021-09-13 22:40:15 +02:00
Mark Russell 2bf339a3f8 License header fix, add missing braces 2021-09-13 16:05:35 -04:00
Mark Russell bfe13d9d68 Fixes based on code reviews (formatting, UI code) 2021-09-13 15:26:28 -04:00
Jean-François Milants 6356c7f276 Fix DisplayAppRecovery : fix include error by forward declaring Controllers in header file. 2021-09-13 20:35:51 +02:00
Riku Isokoski 40765f1173
Merge branch 'develop' into disable_notif_only 2021-09-13 21:22:53 +03:00
Jean-François Milants 9afa412a2a Merge branch 'refactor_adv' of https://github.com/evergreen22/InfiniTime into evergreen22-refactor_adv
# Conflicts:
#	src/components/ble/NimbleController.cpp
2021-09-13 20:22:27 +02:00
JF002 b0bdd2be1c
Merge pull request #549 from hubmartin/pinmap
Put all duplicated GPIO pin definitions to a single file
2021-09-13 20:05:43 +02:00
Tim Gates 84a93b5441
docs: Fix a few typos (#606)
* docs: Fix a few typos

There are small typos in:
- doc/versioning.md
- src/components/ble/NimbleController.cpp
- src/libs/mynewt-nimble/CODING_STANDARDS.md
- src/libs/mynewt-nimble/docs/btshell/btshell_GAP.rst
- src/systemtask/SystemTask.cpp

Fixes:
- Should read `milliseconds` rather than `miliseconds`.
- Should read `unnecessary` rather than `uncesseray`.
- Should read `target` rather than `tharget`.
- Should read `project` rather than `projct`.
- Should read `preferred` rather than `prefered`.
- Should read `functioning` rather than `functionning`.
- Should read `forever` rather than `forver`.
- Should read `existing` rather than `exisiting`.
2021-09-13 20:02:53 +02:00
hubmartin 73d3e41cea Merge branch 'develop' into pinmap 2021-09-13 10:19:07 +02:00
JF002 c9aeef94ea
Merge pull request #617 from ColinKinloch/wake_up_mode_setting_change
Correct change test for wake up mode setting
2021-09-12 18:41:26 +02:00
JF002 8728ac2f6a
Merge pull request #602 from Riksu9000/del_unused
Remove unused variables
2021-09-12 18:34:11 +02:00
JF002 f0329298ac
Merge pull request #580 from Riksu9000/timer_battery_reading
Make battery reading periodic
2021-09-12 18:22:04 +02:00
Riku Isokoski 3ee4876214 Toggle notifications only, keep vibrations. 2021-09-12 11:08:25 +03:00
Mark Russell 1fb5757655 Created basic alarm app 2021-09-10 18:40:13 -04:00
James A. Jerkins 22571d4b38 Advertise fast for at least 30 secs then slow down
On power up, advertise aggressively for at least 30 seconds then switch
to a longer interval to conserve battery life. This fast/slow pattern
is designed to balance connection response time and battery life.

When a disconnect event is received restart the fast/slow pattern.

When a failed connect event is received, restart the fast/slow pattern.

When the screen is activated and ble is not connected, restart the fast/slow pattern.

This pattern is consistent with Apple's BLE developer standards (QA 1931).
2021-09-05 15:53:20 -05:00
James A. Jerkins 4820b2ffe8 Revert "Linear decrease of advert rate to conserve battery"
This reverts commit c32ba844e0.
2021-09-05 15:52:01 -05:00
James A. Jerkins c32ba844e0 Linear decrease of advert rate to conserve battery
Start advertising aggressively when powered on then
slow down linearly over 75 seconds. This will conserve
battery by not advertising rapidly the whole time we
are seeking a connection. The slowest rate is
approximately once every 4.5 seconds to balance
responsiveness and battery life.

We use a fixed advertising duration of 5 seconds and start
with a 62.5 ms advertising interval. Every 5 seconds
(the advertising duration) we step up to a larger
advertising interval (slower advertising). We continue
to increase the advertising interval linearly for
75 seconds from the start of advertising. At 75 seconds
we have an advertising interval of 4.44 seconds which we
keep until connected. A reboot will restart the sequence.

When we receive a disconnect event we restart the sequence
with fast advertising and then slow down as described above.
Note that we are not using the BLE high duty cycle setting to
change the advertising rate. The rate is managed by repeatedly
setting the minimum and maximum intervals.

The linear rate of decrease and the slowest interval size
were determined experimentally by the author. The 5.3 Core
spec suggests that you not advertise slower than once
every 1.2 seconds to preserve responsiveness but we
ignored that suggestion.
2021-09-04 15:57:07 -05:00
Tim Keller 28fdc376b2 Add some comments 2021-09-02 23:01:12 +00:00
Itai Nelken bd1a571399
Update Settings.cpp 2021-09-02 23:20:25 +03:00
James A. Jerkins 3e1fe687b8 Fix styles issues - no change to functionality 2021-09-01 22:50:56 -05:00
James A. Jerkins d69a8e84fa Fix race condition, connect->disconnect->discovery 2021-09-01 22:48:01 -05:00
Jean-François Milants 1635bfafb3 Fix notifications that wouldn't auto close when the timeout elapsed (in preview mode). 2021-08-31 21:56:21 +02:00
James A. Jerkins 00a3f84ea7 Completely reset connection state on fail 2021-08-30 23:17:16 -05:00
Riku Isokoski 21d37d1e23 Merge remote-tracking branch 'upstream/develop' into timer_battery_reading 2021-08-30 10:15:19 +03:00
James A. Jerkins be31f417db WIP Refactor ble advertising
Refactor ble advertising based on ble standards and conventions.
Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 15:50:04 -05:00
hubmartin 8390d0ef72 Merge branch 'develop' into pinmap 2021-08-29 11:43:50 +02:00
Jean-François Milants 6c023785e5 Fix wake on tap/double tap. 2021-08-28 21:30:31 +02:00
Jean-François Milants 31bc47d1cb Settings : use enums instead of ints to store colors. Group all PTS settings into a struct.
PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication.
Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 21:02:11 +02:00
JF002 ef9f809e14
Merge pull request #458 from kieranc/pinetimestyle-colorpicker
Add color picker for PineTimeStyle watchface
2021-08-28 20:56:34 +02:00
Riku Isokoski c2fae47391 Merge branch 'develop' into refresh_rework 2021-08-28 17:25:50 +03:00
Riku Isokoski 085c9ab2e1 Merge branch 'develop' into timer_battery_reading 2021-08-28 16:54:40 +03:00
Jean-François Milants fab49f8557 Fix recovery firmware since last changes in DisplayApp. 2021-08-28 15:23:13 +02:00
Jean-François Milants 0313277ae6 Fix touchinfo typo in SystemTask. 2021-08-28 15:10:14 +02:00
Jean-François Milants 45e7638fc2 Merge branch 'twimaster_rework' of https://github.com/Riksu9000/InfiniTime into Riksu9000-twimaster_rework
# Conflicts:
#	src/systemtask/SystemTask.cpp
2021-08-28 15:08:50 +02:00
Colin Kinloch b45d7c372d Correct change test for wake up mode setting 2021-08-26 19:42:02 +01:00