* ShakeWake: Fixed instant wake after sleep issue in certain positions
Add lastX var to track the previous x acceleration for correct calculation of speed.
Reorder axes for clarity.
---------
Co-authored-by: Isaac <114504394+isaacc27@users.noreply.github.com>
Co-authored-by: FintasticMan <52415484+FintasticMan@users.noreply.github.com>
Calls to Spi::Init() are not needed, pin initialization is already done in ctor().
Remove calls to Spi::Sleep()/Spi::Wakeup() to ensure that SPI CS pins are kept high even in sleep mode.
Ensure that all pins are set to their default configuration during sleep mode.
Disable the workaround for FTPAN58 (SPI freezes when transfering a single byte) at the end of the transfer. This disables the resources needed for the workaround.
Those changes reduce the power usage by 430-490µA.
The DC/DC regulator reduce the power consumption of the MCU compared to the default LDO regulator. The DC/DC regulator needs additional HW that is mounted on the PineTime.
This change reduces the power usage by 380µA during fast advertising, by 200µA during slow advertising and by 186µA when BLE is disabled.
Put the HRS3300 to sleep mode when InfiniTime is going to sleep. This change reduces the power consumption by 130µA when the heart rate sensor is disabled.
LVGL supports custom implementation of malloc() and free() so using pvPortMalloc() and vPortFree() is just a matter of setting the right variables.
Other libraries (NimBLE, LittleFS) and InfiniTime code (new) call malloc() and free() from stdlib. InfiniTime now provides the file stdlib.c that provides a custom implementation for malloc(), free(), calloc() and realloc(). This ensures that all calls to the standard allocator are redirected to the FreeRTOS memory manager.
Note that realloc() is needed by NimBLE.
* Refactor and document the Watchdog driver to make it more readable.
Fix the configuration of the behaviours configuration that was not properly implemented (but it didn't cause any side effect since the correct value was eventually set in NRF_WDT->CONFIG).
Fix the wrong interpretation of the reset reasons caused by implicit conversions of int to bool.
New implementation of the heart rate sensor data processing using a frequency based PPG algorithm.
The HRS3300 settings are fine-tuned for better signal to noise at 10Hz.
The measurement delay is now set to 100ms.
Enable and use the ambient light sensor.
FFT implementation based on ArduinoFFT (https://github.com/kosme/arduinoFFT, GPLv3.0).
Replace custom FreeRTOS inactivity timers with LVGL inactivity timers.
DisplayApp: Trigger display activity on timer done.
inactivity: Add additional checks
The backlight could be turned on by RestoreBrightness() on ble connect
event.
inactivity: Trigger activity on screen switch
A notification timing out could put the watch to sleep immediately.
While this could be ideal behaviour, it was caused by delay in
processing the EnableSleeping event and pushing RestoreBrightness to
DisplayApp.
Fixes#1467 "Double tapping PineTimeStyle steps style button sends watch to sleep"
Double tap is disabled on the color settings screen by checking if the Rnd button is visible, but this didn't work for the options screen as the Rnd button isn't visible. I've changed it to check if the Close button is visible instead, which is used on both settings screens, and resolves the bug. I also changed the button used to disable the long press behaviour which was an as-yet-undiscovered bug which would have allowed the long press action to be used when the options screen was visible.
