Commit graph

158 commits

Author SHA1 Message Date
Riku Isokoski b210090837 Merge branch 'develop' into detect_full_charge 2021-09-22 12:03:41 +03:00
Jean-François Milants f3b5da0049 Fix the display of the date after a reset : when the date/time was restored from the noinit area, the date was displayed as "--" instead of the actual date.
This issue was caused by DateTime::SetCurrentTime() that would not update the internal state of the class : dayOfWeek, Month, Year were not properly updated according to the current time.
2021-09-19 17:42:50 +02:00
Jean-François Milants f556003de3 Merge branch 'PersistantStorage' of git://github.com/geekbozu/InfiniTime into geekbozu-PersistantStorage
# Conflicts:
#	src/systemtask/SystemTask.cpp
2021-09-18 17:37:37 +02:00
Mark Russell b9e56843a2 resolve conflict in src/systemtask/Messages.h 2021-09-16 16:20:39 -04:00
Mark Russell cdf99b08f4 Revert "Merge upstream"
This reverts commit 1d43adcdfa.
2021-09-16 16:12:20 -04:00
Mark Russell 1d43adcdfa Merge upstream 2021-09-16 16:01:25 -04:00
Mark Russell f857a757a7 Fixes per Riksu9000's feedback 2021-09-16 15:38:31 -04:00
Reinhold Gschweicher f89780f332 Remove unused include in MotoController.h
Remove the unused include `app_timer.h` in `MotorController.h`
2021-09-13 22:40:15 +02:00
Mark Russell 2bf339a3f8 License header fix, add missing braces 2021-09-13 16:05:35 -04:00
Mark Russell bfe13d9d68 Fixes based on code reviews (formatting, UI code) 2021-09-13 15:26:28 -04:00
Jean-François Milants 9afa412a2a Merge branch 'refactor_adv' of https://github.com/evergreen22/InfiniTime into evergreen22-refactor_adv
# Conflicts:
#	src/components/ble/NimbleController.cpp
2021-09-13 20:22:27 +02:00
JF002 b0bdd2be1c
Merge pull request #549 from hubmartin/pinmap
Put all duplicated GPIO pin definitions to a single file
2021-09-13 20:05:43 +02:00
Tim Gates 84a93b5441
docs: Fix a few typos (#606)
* docs: Fix a few typos

There are small typos in:
- doc/versioning.md
- src/components/ble/NimbleController.cpp
- src/libs/mynewt-nimble/CODING_STANDARDS.md
- src/libs/mynewt-nimble/docs/btshell/btshell_GAP.rst
- src/systemtask/SystemTask.cpp

Fixes:
- Should read `milliseconds` rather than `miliseconds`.
- Should read `unnecessary` rather than `uncesseray`.
- Should read `target` rather than `tharget`.
- Should read `project` rather than `projct`.
- Should read `preferred` rather than `prefered`.
- Should read `functioning` rather than `functionning`.
- Should read `forever` rather than `forver`.
- Should read `existing` rather than `exisiting`.
2021-09-13 20:02:53 +02:00
hubmartin 73d3e41cea Merge branch 'develop' into pinmap 2021-09-13 10:19:07 +02:00
JF002 c9aeef94ea
Merge pull request #617 from ColinKinloch/wake_up_mode_setting_change
Correct change test for wake up mode setting
2021-09-12 18:41:26 +02:00
Mark Russell 1fb5757655 Created basic alarm app 2021-09-10 18:40:13 -04:00
James A. Jerkins 22571d4b38 Advertise fast for at least 30 secs then slow down
On power up, advertise aggressively for at least 30 seconds then switch
to a longer interval to conserve battery life. This fast/slow pattern
is designed to balance connection response time and battery life.

When a disconnect event is received restart the fast/slow pattern.

When a failed connect event is received, restart the fast/slow pattern.

When the screen is activated and ble is not connected, restart the fast/slow pattern.

This pattern is consistent with Apple's BLE developer standards (QA 1931).
2021-09-05 15:53:20 -05:00
James A. Jerkins 4820b2ffe8 Revert "Linear decrease of advert rate to conserve battery"
This reverts commit c32ba844e0.
2021-09-05 15:52:01 -05:00
James A. Jerkins c32ba844e0 Linear decrease of advert rate to conserve battery
Start advertising aggressively when powered on then
slow down linearly over 75 seconds. This will conserve
battery by not advertising rapidly the whole time we
are seeking a connection. The slowest rate is
approximately once every 4.5 seconds to balance
responsiveness and battery life.

We use a fixed advertising duration of 5 seconds and start
with a 62.5 ms advertising interval. Every 5 seconds
(the advertising duration) we step up to a larger
advertising interval (slower advertising). We continue
to increase the advertising interval linearly for
75 seconds from the start of advertising. At 75 seconds
we have an advertising interval of 4.44 seconds which we
keep until connected. A reboot will restart the sequence.

When we receive a disconnect event we restart the sequence
with fast advertising and then slow down as described above.
Note that we are not using the BLE high duty cycle setting to
change the advertising rate. The rate is managed by repeatedly
setting the minimum and maximum intervals.

The linear rate of decrease and the slowest interval size
were determined experimentally by the author. The 5.3 Core
spec suggests that you not advertise slower than once
every 1.2 seconds to preserve responsiveness but we
ignored that suggestion.
2021-09-04 15:57:07 -05:00
Riku Isokoski b31b2425f8 Use percentage instead of IsFull 2021-09-03 16:57:00 +03:00
Riku Isokoski fd52ca8fe6 Detect full charge and improve watchface display 2021-09-03 14:35:38 +03:00
James A. Jerkins 3e1fe687b8 Fix styles issues - no change to functionality 2021-09-01 22:50:56 -05:00
James A. Jerkins d69a8e84fa Fix race condition, connect->disconnect->discovery 2021-09-01 22:48:01 -05:00
James A. Jerkins 00a3f84ea7 Completely reset connection state on fail 2021-08-30 23:17:16 -05:00
Riku Isokoski 21d37d1e23 Merge remote-tracking branch 'upstream/develop' into timer_battery_reading 2021-08-30 10:15:19 +03:00
James A. Jerkins be31f417db WIP Refactor ble advertising
Refactor ble advertising based on ble standards and conventions.
Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 15:50:04 -05:00
hubmartin 8390d0ef72 Merge branch 'develop' into pinmap 2021-08-29 11:43:50 +02:00
Jean-François Milants 31bc47d1cb Settings : use enums instead of ints to store colors. Group all PTS settings into a struct.
PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication.
Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 21:02:11 +02:00
Colin Kinloch b45d7c372d Correct change test for wake up mode setting 2021-08-26 19:42:02 +01:00
hubmartin 2a299fe275 Merge branch 'develop' into pinmap 2021-08-22 22:11:57 +02:00
Tim Keller 4f6d7e2c63 Move Backup to the system task. 2021-08-19 00:51:12 +00:00
Tim Keller 2dd7b8ba2c Add clearing of noinit segment on bad word
Code readability cleanup
2021-08-19 00:44:22 +00:00
Tim Keller 55f8908769 Make Clock Persistant. 2021-08-17 23:53:57 +00:00
Kieran Cawthray 30b32e4c8a Merge remote-tracking branch 'upstream/develop' into pinetimestyle-colorpicker 2021-08-15 17:50:56 +02:00
Riku Isokoski 044036e884 Merge branch 'develop' into timer_battery_reading 2021-08-14 23:02:23 +03:00
Jean-François Milants 0eeed5ac33 Merge branch 'call-improvements' of https://github.com/Riksu9000/InfiniTime into Riksu9000-call-improvements
# Conflicts:
#	src/displayapp/screens/Metronome.cpp
2021-08-14 21:54:00 +02:00
Riku Isokoski 23bde0d18e Make battery reading periodic. Add events. Disable pullup 2021-08-14 21:18:11 +03:00
Kieran Cawthray 52ee25e551 Merge remote-tracking branch 'upstream/develop' into pinetimestyle-colorpicker 2021-08-12 21:26:51 +02:00
hubmartin 0d083a2bea Merge branch 'develop' into pinmap 2021-08-11 22:00:55 +02:00
JF002 9fb3755088
Merge pull request #483 from Riksu9000/fix_adc
Fix misconfigured ADC and remove now unnecessary filtering
2021-08-10 12:32:09 +02:00
Jean-François Milants c086520c97 Code cleaning in Clock, WatchFaceAnalog, WatchFaceDigital and PineTimeStyle, inspired by PR #232 by nscooling. 2021-08-10 11:39:25 +02:00
hubmartin abd8f343e4 Rename backlight level pins 2021-08-04 14:43:04 +02:00
hubmartin b3e6da7514 Cleanup, set Pinetime as default 2021-08-03 20:40:27 +02:00
hubmartin b7aa04e1f5 PinMap with namespace and constexpr 2021-08-03 20:32:23 +02:00
hubmartin 28abeae21b DRAFT: Put gpio pins to separate file 2021-08-02 21:37:48 +02:00
Riku Isokoski 09aaa58710 Remove floating point calculation 2021-08-01 16:19:09 +03:00
Riku Isokoski e6dcb3009f Improvements 2021-08-01 13:05:48 +03:00
Riku Isokoski 5bdef365f2 Merge branch 'develop' into HEAD 2021-08-01 11:47:26 +03:00
Riku Isokoski 79ee65bfd5 Increase ADC precision 2021-07-27 22:41:48 +03:00
Riku Isokoski a0a05553cf Merge branch 'develop' into fix_adc 2021-07-27 21:57:21 +03:00