James A. Jerkins
c32ba844e0
Linear decrease of advert rate to conserve battery
...
Start advertising aggressively when powered on then
slow down linearly over 75 seconds. This will conserve
battery by not advertising rapidly the whole time we
are seeking a connection. The slowest rate is
approximately once every 4.5 seconds to balance
responsiveness and battery life.
We use a fixed advertising duration of 5 seconds and start
with a 62.5 ms advertising interval. Every 5 seconds
(the advertising duration) we step up to a larger
advertising interval (slower advertising). We continue
to increase the advertising interval linearly for
75 seconds from the start of advertising. At 75 seconds
we have an advertising interval of 4.44 seconds which we
keep until connected. A reboot will restart the sequence.
When we receive a disconnect event we restart the sequence
with fast advertising and then slow down as described above.
Note that we are not using the BLE high duty cycle setting to
change the advertising rate. The rate is managed by repeatedly
setting the minimum and maximum intervals.
The linear rate of decrease and the slowest interval size
were determined experimentally by the author. The 5.3 Core
spec suggests that you not advertise slower than once
every 1.2 seconds to preserve responsiveness but we
ignored that suggestion.
2021-09-04 15:57:07 -05:00
Riku Isokoski
b31b2425f8
Use percentage instead of IsFull
2021-09-03 16:57:00 +03:00
Riku Isokoski
ac2ccaeff6
Auto realign battery icon in Analog watch face
2021-09-03 14:57:07 +03:00
Riku Isokoski
fd52ca8fe6
Detect full charge and improve watchface display
2021-09-03 14:35:38 +03:00
Tim Keller
28fdc376b2
Add some comments
2021-09-02 23:01:12 +00:00
Itai Nelken
bd1a571399
Update Settings.cpp
2021-09-02 23:20:25 +03:00
Jean-François Milants
6f9f0e8b0e
Set version to 1.4.0.
2021-09-02 20:32:50 +02:00
James A. Jerkins
3e1fe687b8
Fix styles issues - no change to functionality
2021-09-01 22:50:56 -05:00
James A. Jerkins
d69a8e84fa
Fix race condition, connect->disconnect->discovery
2021-09-01 22:48:01 -05:00
JF002
f6248a88ba
Merge pull request #579 from mabuch/fix-github-build
...
fix Github Action build Firmware
2021-09-01 20:53:28 +02:00
Jean-François Milants
1635bfafb3
Fix notifications that wouldn't auto close when the timeout elapsed (in preview mode).
2021-08-31 21:56:21 +02:00
James A. Jerkins
00a3f84ea7
Completely reset connection state on fail
2021-08-30 23:17:16 -05:00
Riku Isokoski
21d37d1e23
Merge remote-tracking branch 'upstream/develop' into timer_battery_reading
2021-08-30 10:15:19 +03:00
James A. Jerkins
be31f417db
WIP Refactor ble advertising
...
Refactor ble advertising based on ble standards and conventions.
Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 15:50:04 -05:00
hubmartin
8390d0ef72
Merge branch 'develop' into pinmap
2021-08-29 11:43:50 +02:00
Riku Isokoski
e57ff28231
Let lvgl control queueTimeout
2021-08-29 12:40:48 +03:00
Jean-François Milants
6c023785e5
Fix wake on tap/double tap.
2021-08-28 21:30:31 +02:00
Jean-François Milants
31bc47d1cb
Settings : use enums instead of ints to store colors. Group all PTS settings into a struct.
...
PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication.
Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 21:02:11 +02:00
JF002
ef9f809e14
Merge pull request #458 from kieranc/pinetimestyle-colorpicker
...
Add color picker for PineTimeStyle watchface
2021-08-28 20:56:34 +02:00
JF002
2870d3ae6c
Merge pull request #497 from Riksu9000/refresh_rework
...
Rework Refresh
2021-08-28 16:39:48 +02:00
Riku Isokoski
c2fae47391
Merge branch 'develop' into refresh_rework
2021-08-28 17:25:50 +03:00
Riku Isokoski
d2d97319e0
Merge branch 'develop' into update_touch_driver
2021-08-28 17:19:49 +03:00
Riku Isokoski
c78177eedf
Merge branch 'develop' into fit_more_tasks
2021-08-28 17:10:01 +03:00
Riku Isokoski
085c9ab2e1
Merge branch 'develop' into timer_battery_reading
2021-08-28 16:54:40 +03:00
Jean-François Milants
fab49f8557
Fix recovery firmware since last changes in DisplayApp.
2021-08-28 15:23:13 +02:00
Jean-François Milants
0313277ae6
Fix touchinfo typo in SystemTask.
2021-08-28 15:10:14 +02:00
Jean-François Milants
f895da8634
Merge branch 'Riksu9000-twimaster_rework' into develop
2021-08-28 15:09:16 +02:00
Jean-François Milants
45e7638fc2
Merge branch 'twimaster_rework' of https://github.com/Riksu9000/InfiniTime into Riksu9000-twimaster_rework
...
# Conflicts:
# src/systemtask/SystemTask.cpp
2021-08-28 15:08:50 +02:00
JF002
969de9a8bc
Merge pull request #492 from Riksu9000/new_touch_handler
...
New touch handler
2021-08-28 15:06:03 +02:00
Colin Kinloch
b45d7c372d
Correct change test for wake up mode setting
2021-08-26 19:42:02 +01:00
Fabien Benetou
d7293a44df
Infini-iOS
2021-08-26 15:11:20 +02:00
Tim Keller
110c82c225
Move noinit to after BSS segment,
...
Now dynamically allocates noinit area size
stores it after the bss before the heap and stack.
2021-08-23 20:13:26 +00:00
hubmartin
db50131ed4
Remove commented commands completely
2021-08-23 15:02:40 +02:00
hubmartin
d832a6c908
Merge branch 'develop' into wake-time
2021-08-23 15:00:56 +02:00
hubmartin
51c5257548
Update startup SCL toggling pinmap definitions
2021-08-22 22:17:57 +02:00
hubmartin
2a299fe275
Merge branch 'develop' into pinmap
2021-08-22 22:11:57 +02:00
Kieran Cawthray
8ac1ae70cc
Merge remote-tracking branch 'upstream/develop' into pinetimestyle-colorpicker
2021-08-19 15:14:04 +02:00
Riku Isokoski
2b30ff4fc6
Remove unused variables
2021-08-19 11:12:34 +03:00
Tim Keller
c9dedfd402
Add some VSCODE stuff to gitignore...
...
Allow settings to stop naggin me that it has added assosiation types
2021-08-19 00:51:42 +00:00
Tim Keller
4f6d7e2c63
Move Backup to the system task.
2021-08-19 00:51:12 +00:00
Tim Keller
2dd7b8ba2c
Add clearing of noinit segment on bad word
...
Code readability cleanup
2021-08-19 00:44:22 +00:00
Tim Keller
16502b788f
Add MCUBOOT linker changes
...
use better linker constant names
2021-08-19 00:14:42 +00:00
Riku Isokoski
85c99797da
Merge branch 'develop' into new_touch_handler
2021-08-18 22:07:02 +03:00
Riku Isokoski
40392d7b91
Use highest frequency and move mutex creation to Init
2021-08-18 21:40:27 +03:00
hubmartin
df8ea7fe52
Add memory print usage
2021-08-18 20:21:10 +02:00
Riku Isokoski
b91100573e
Fix music app buttons
2021-08-18 20:19:02 +02:00
Riku Isokoski
780a811f05
Automatic error detection
2021-08-18 15:23:30 +03:00
Tim Keller
55f8908769
Make Clock Persistant.
2021-08-17 23:53:57 +00:00
Riku Isokoski
9c175e2f0c
Fix after merge
2021-08-17 16:01:18 +03:00
Riku Isokoski
5b969ccfa9
Merge branch 'develop' into update_touch_driver
2021-08-17 15:35:29 +03:00
