scott/InfiniTime
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases 1 Wiki Activity
InfiniTime/src/drivers/Bma421_C/bma423.h
JF002 c6dca25b9f
Add support for BMA425 acceleration sensor. (#440) 
* Add support for BMA425 acceleration sensor.
2021-06-19 20:27:59 +02:00

1117 lines
37 KiB
C
Raw Blame History

/**
* Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved.
*
* BSD-3-Clause
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* @file bma423.h
* @date 2020-05-08
* @version V2.14.13
*
*/
/**
* \ingroup bma4xy
* \defgroup bma423 BMA423
* @brief Sensor driver for BMA423 sensor
*/
#ifndef BMA423_H
#define BMA423_H
#ifdef __cplusplus
extern "C" {
#endif
#include "bma4.h"
/**\name Chip ID of BMA423 sensor */
#define BMA423_CHIP_ID UINT8_C(0x11)
#define BMA425_CHIP_ID UINT8_C(0x13)
/**\ Configuration ID start position of BMA423 sensor */
#define BMA423_CONFIG_ID_START_ADDR UINT8_C(66)
/**\name Sensor feature size */
#define BMA423_FEATURE_SIZE UINT8_C(70)
#define BMA423_ANY_MOT_LEN UINT8_C(4)
/**\name Feature offset address */
#define BMA423_ANY_MOT_OFFSET UINT8_C(0x00)
#define BMA423_NO_MOT_OFFSET UINT8_C(0x04)
#define BMA423_STEP_CNTR_PARAM_OFFSET UINT8_C(0x08)
#define BMA423_STEP_CNTR_OFFSET UINT8_C(0x3A)
#define BMA423_SINGLE_TAP_OFFSET UINT8_C(0x3C)
#define BMA423_DOUBLE_TAP_OFFSET UINT8_C(0x3E)
#define BMA423_WRIST_WEAR_OFFSET UINT8_C(0x40)
#define BMA423_CONFIG_ID_OFFSET UINT8_C(0x42)
#define BMA423_AXES_REMAP_OFFSET UINT8_C(0x44)
/**\name Read/Write Lengths */
#define BMA423_RD_WR_MIN_LEN UINT8_C(2)
#define BMA423_NO_MOT_RD_WR_LEN (BMA423_ANY_MOT_LEN + BMA423_NO_MOT_OFFSET)
/*! @name Mask definitions for major and minor config */
#define BMA423_CONFIG_MAJOR_MSK UINT16_C(0X3C0)
#define BMA423_CONFIG_MINOR_MSK UINT8_C(0X1F)
/*! @name Bit position for major config */
#define BMA423_CONFIG_MAJOR_POS UINT8_C(0X06)
/**************************************************************/
/**\name Re-map Axes */
/**************************************************************/
#define BMA423_X_AXIS_MASK UINT8_C(0x03)
#define BMA423_X_AXIS_SIGN_MASK UINT8_C(0x04)
#define BMA423_Y_AXIS_MASK UINT8_C(0x18)
#define BMA423_Y_AXIS_SIGN_MASK UINT8_C(0x20)
#define BMA423_Z_AXIS_MASK UINT8_C(0xC0)
#define BMA423_Z_AXIS_SIGN_MASK UINT8_C(0x01)
/**************************************************************/
/**\name Step Counter/Detector/Activity */
/**************************************************************/
/**\name Step counter/activity enable macros */
#define BMA423_STEP_CNTR_EN_MSK UINT8_C(0x10)
#define BMA423_STEP_ACT_EN_MSK UINT8_C(0x20)
/**\name Step counter water-mark macros */
#define BMA423_STEP_CNTR_WM_MSK UINT16_C(0x03FF)
/**\name Step counter reset macros */
#define BMA423_STEP_CNTR_RST_POS UINT8_C(2)
#define BMA423_STEP_CNTR_RST_MSK UINT8_C(0x04)
/**\name Step detector enable macros */
#define BMA423_STEP_DETECTOR_EN_POS UINT8_C(3)
#define BMA423_STEP_DETECTOR_EN_MSK UINT8_C(0x08)
/**\name Wrist-wear enable macros */
#define BMA423_WRIST_WEAR_EN_MSK UINT8_C(0x01)
/**\name Step count output length*/
#define BMA423_STEP_CNTR_DATA_SIZE UINT16_C(4)
/**\name single tap enable macros */
#define BMA423_SINGLE_TAP_EN_MSK UINT8_C(0x01)
/**\name double tap enable macros */
#define BMA423_DOUBLE_TAP_EN_MSK UINT8_C(0x01)
/**\name tap sensitivity macros */
#define BMA423_TAP_SENS_POS UINT8_C(1)
#define BMA423_TAP_SENS_MSK UINT8_C(0x0E)
/**\name Tap selection macro */
#define BMA423_TAP_SEL_POS UINT8_C(4)
#define BMA423_TAP_SEL_MSK UINT8_C(0x10)
/**************************************************************/
/**\name Any/no Motion */
/**************************************************************/
/**\name Any/No motion threshold macros */
#define BMA423_ANY_NO_MOT_THRES_MSK UINT16_C(0x07FF)
/**\name Any/No motion duration macros */
#define BMA423_ANY_NO_MOT_DUR_MSK UINT16_C(0x1FFF)
/**\name Any/No motion enable macros */
#define BMA423_ANY_NO_MOT_AXIS_EN_POS UINT8_C(0x0D)
#define BMA423_ANY_NO_MOT_AXIS_EN_MSK UINT16_C(0xE000)
/**************************************************************/
/**\name User macros */
/**************************************************************/
/**\name Any-motion/No-motion axis enable macros */
#define BMA423_X_AXIS_EN UINT8_C(0x01)
#define BMA423_Y_AXIS_EN UINT8_C(0x02)
#define BMA423_Z_AXIS_EN UINT8_C(0x04)
#define BMA423_EN_ALL_AXIS UINT8_C(0x07)
#define BMA423_DIS_ALL_AXIS UINT8_C(0x00)
/**\name Feature enable macros for the sensor */
#define BMA423_STEP_CNTR UINT8_C(0x01)
#define BMA423_STEP_ACT UINT8_C(0x02)
#define BMA423_WRIST_WEAR UINT8_C(0x04)
#define BMA423_SINGLE_TAP UINT8_C(0x08)
#define BMA423_DOUBLE_TAP UINT8_C(0x10)
/**\name Interrupt status macros */
#define BMA423_SINGLE_TAP_INT UINT8_C(0x01)
#define BMA423_STEP_CNTR_INT UINT8_C(0x02)
#define BMA423_ACTIVITY_INT UINT8_C(0x04)
#define BMA423_WRIST_WEAR_INT UINT8_C(0x08)
#define BMA423_DOUBLE_TAP_INT UINT8_C(0x10)
#define BMA423_ANY_MOT_INT UINT8_C(0x20)
#define BMA423_NO_MOT_INT UINT8_C(0x40)
#define BMA423_ERROR_INT UINT8_C(0x80)
/**\name Activity recognition macros */
#define BMA423_USER_STATIONARY UINT8_C(0x00)
#define BMA423_USER_WALKING UINT8_C(0x01)
#define BMA423_USER_RUNNING UINT8_C(0x02)
#define BMA423_STATE_INVALID UINT8_C(0x03)
/******************************************************************************/
/*! @name Structure Declarations */
/******************************************************************************/
/*!
* @brief Any/No motion configuration
*/
struct bma423_any_no_mot_config
{
/*! Expressed in 50 Hz samples (20 ms) */
uint16_t duration;
/*! Threshold value for Any-motion/No-motion detection in
* 5.11g format
*/
uint16_t threshold;
/*! To enable selected axes */
uint8_t axes_en;
};
/*!
* @brief Axes re-mapping configuration
*/
struct bma423_axes_remap
{
/*! Re-mapped x-axis */
uint8_t x_axis;
/*! Re-mapped y-axis */
uint8_t y_axis;
/*! Re-mapped z-axis */
uint8_t z_axis;
/*! Re-mapped x-axis sign */
uint8_t x_axis_sign;
/*! Re-mapped y-axis sign */
uint8_t y_axis_sign;
/*! Re-mapped z-axis sign */
uint8_t z_axis_sign;
};
/*!
* @brief Step counter param settings
*/
struct bma423_stepcounter_settings
{
/*! Step Counter param 1 */
uint16_t param1;
/*! Step Counter param 2 */
uint16_t param2;
/*! Step Counter param 3 */
uint16_t param3;
/*! Step Counter param 4 */
uint16_t param4;
/*! Step Counter param 5 */
uint16_t param5;
/*! Step Counter param 6 */
uint16_t param6;
/*! Step Counter param 7 */
uint16_t param7;
/*! Step Counter param 8 */
uint16_t param8;
/*! Step Counter param 9 */
uint16_t param9;
/*! Step Counter param 10 */
uint16_t param10;
/*! Step Counter param 11 */
uint16_t param11;
/*! Step Counter param 12 */
uint16_t param12;
/*! Step Counter param 13 */
uint16_t param13;
/*! Step Counter param 14 */
uint16_t param14;
/*! Step Counter param 15 */
uint16_t param15;
/*! Step Counter param 16 */
uint16_t param16;
/*! Step Counter param 17 */
uint16_t param17;
/*! Step Counter param 18 */
uint16_t param18;
/*! Step Counter param 19 */
uint16_t param19;
/*! Step Counter param 20 */
uint16_t param20;
/*! Step Counter param 21 */
uint16_t param21;
/*! Step Counter param 22 */
uint16_t param22;
/*! Step Counter param 23 */
uint16_t param23;
/*! Step Counter param 24 */
uint16_t param24;
/*! Step Counter param 25 */
uint16_t param25;
};
/***************************************************************************/
/*! BMA423 User Interface function prototypes
****************************************************************************/
/**
* \ingroup bma423
* \defgroup bma423ApiInit Initialization
* @brief Initialize the sensor and device structure
*/
/*!
* \ingroup bma423ApiInit
* \page bma423_api_bma423_init bma423_init
* \code
* int8_t bma423_init(struct bma4_dev *dev);
* \endcode
* @details This API is the entry point.
* Call this API before using all other APIs.
* This API reads the chip-id of the sensor and sets the resolution.
*
* @param[in,out] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_init(struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiConfig ConfigFile
* @brief Write binary configuration in the sensor
*/
/*!
* \ingroup bma423ApiConfig
* \page bma423_api_bma423_write_config_file bma423_write_config_file
* \code
* int8_t bma423_write_config_file(struct bma4_dev *dev);
* \endcode
* @details This API is used to upload the config file to enable the features of
* the sensor.
*
* @param[in] dev : Structure instance of bma4_dev.
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_write_config_file(struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiConfigId ConfigId
* @brief Get Configuration ID of the sensor
*/
/*!
* \ingroup bma423ApiConfig
* \page bma423_api_bma423_get_config_id bma423_get_config_id
* \code
* int8_t bma423_get_config_id(uint16_t *config_id, struct bma4_dev *dev);
* \endcode
* @details This API is used to get the configuration id of the sensor.
*
* @param[out] config_id : Pointer variable used to store the configuration id.
* @param[in] dev : Structure instance of bma4_dev.
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_get_config_id(uint16_t *config_id, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiMapInt Map / Unmap Interrupt
* @brief Map / Unmap user provided interrupt to interrupt pin1 or pin2 of the sensor
*/
/*!
* \ingroup bma423ApiMapInt
* \page bma423_api_bma423_map_interrupt bma423_map_interrupt
* \code
* int8_t bma423_map_interrupt(uint8_t int_line, uint16_t int_map, uint8_t enable, struct bma4_dev *dev);
* \endcode
* @details This API sets/unsets the user provided interrupt to either
* interrupt pin1 or pin2 in the sensor.
*
* @param[in] int_line: Variable to select either interrupt pin1 or pin2.
*
*@verbatim
* int_line | Macros
* ------------|-------------------
* 0x00 | BMA4_INTR1_MAP
* 0x01 | BMA4_INTR2_MAP
*@endverbatim
*
* @param[in] int_map : Variable to specify the interrupts.
* @param[in] enable : Variable to specify mapping or unmapping of interrupts.
*
*@verbatim
* enable | Macros
* --------|-------------------
* 0x00 | BMA4_DISABLE
* 0x01 | BMA4_ENABLE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev.
*
* @note Below macros specify the interrupts.
*
* Feature Interrupts
* - BMA423_STEP_CNTR_INT
* - BMA423_ACTIVITY_INT
* - BMA423_WRIST_WEAR_INT
* - BMA423_WAKEUP_INT
* - BMA423_ANY_MOT_INT
* - BMA423_NO_MOT_INT
* - BMA423_ERROR_INT
*
* Hardware Interrupts
* - BMA4_FIFO_FULL_INT
* - BMA4_FIFO_WM_INT
* - BMA4_DATA_RDY_INT
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_map_interrupt(uint8_t int_line, uint16_t int_map, uint8_t enable, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiIntS Interrupt Status
* @brief Read interrupt status of the sensor
*/
/*!
* \ingroup bma423ApiIntS
* \page bma423_api_bma423_read_int_status bma423_read_int_status
* \code
* int8_t bma423_read_int_status(uint16_t *int_status, struct bma4_dev *dev);
* \endcode
* @details This API reads the bma423 interrupt status from the sensor.
*
* @param[out] int_status : Variable to store the interrupt status read from
* the sensor.
* @param[in] dev : Structure instance of bma4_dev.
*
* @note Below macros are used to check the interrupt status.
*
* Feature Interrupts
* - BMA423_STEP_CNTR_INT
* - BMA423_ACTIVITY_INT
* - BMA423_WRIST_WEAR_INT
* - BMA423_WAKEUP_INT
* - BMA423_ANY_MOT_INT
* - BMA423_NO_MOT_INT
* - BMA423_ERROR_INT
*
* Hardware Interrupts
* - BMA4_FIFO_FULL_INT
* - BMA4_FIFO_WM_INT
* - BMA4_DATA_RDY_INT
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_read_int_status(uint16_t *int_status, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiFeat Sensor Feature
* @brief Enables / Disables features of the sensor
*/
/*!
* \ingroup bma423ApiFeat
* \page bma423_api_bma423_feature_enable bma423_feature_enable
* \code
* int8_t bma423_feature_enable(uint8_t feature, uint8_t enable, struct bma4_dev *dev);
* \endcode
* @details This API enables/disables the features of the sensor.
*
* @param[in] feature : Variable to specify the features which are to be set in
* bma423 sensor.
* @param[in] enable : Variable which specifies whether to enable or disable the
* features in the bma456 sensor.
*
*@verbatim
* enable | Macros
* --------|-------------------
* 0x00 | BMA4_DISABLE
* 0x01 | BMA4_ENABLE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev.
*
* @note User should use the below macros to enable or disable the
* features of bma423 sensor
*
* - BMA423_STEP_CNTR
* - BMA423_ACTIVITY
* - BMA423_WAKEUP
* - BMA423_WRIST_WEAR
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_feature_enable(uint8_t feature, uint8_t enable, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiRemap Remap Axes
* @brief Set / Get x, y and z axis re-mapping in the sensor
*/
/*!
* \ingroup bma423ApiRemap
* \page bma423_api_bma423_set_remap_axes bma423_set_remap_axes
* \code
* int8_t bma423_set_remap_axes(const struct bma423_axes_remap *remap_data, struct bma4_dev *dev);
* \endcode
* @details This API performs x, y and z axis remapping in the sensor.
*
* @param[in] remap_data : Pointer to store axes remapping data.
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_set_remap_axes(const struct bma423_axes_remap *remap_data, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiRemap
* \page bma423_api_bma423_get_remap_axes bma423_get_remap_axes
* \code
* int8_t bma423_get_remap_axes(struct bma423_axes_remap *remap_data, struct bma4_dev *dev);
* \endcode
* @details This API reads the x, y and z axis remap data from the sensor.
*
* @param[out] remap_data : Pointer to store axis remap data which is read
* from the bma423 sensor.
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_get_remap_axes(struct bma423_axes_remap *remap_data, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiStepC Step counter
* @brief Operations of step counter feature of the sensor
*/
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_step_counter_set_watermark bma423_step_counter_set_watermark
* \code
* int8_t bma423_step_counter_set_watermark(uint16_t step_counter_wm, struct bma4_dev *dev);
* \endcode
* @details This API sets the watermark level for step counter interrupt in
* the sensor.
*
* @param[in] step_counter_wm : Variable which specifies watermark level
* count
* @note Valid values are from 1 to 1023
* @note Value 0 is used for step detector interrupt
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_step_counter_set_watermark(uint16_t step_counter_wm, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_step_counter_get_watermark bma423_step_counter_get_watermark
* \code
* int8_t bma423_step_counter_get_watermark(uint16_t *step_counter_wm, struct bma4_dev *dev);
* \endcode
* @details This API gets the water mark level set for step counter interrupt
* in the sensor
*
* @param[out] step_counter_wm : Pointer variable which stores the water mark
* level read from the sensor.
* @note valid values are from 1 to 1023
* @note value 0 is used for step detector interrupt
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_step_counter_get_watermark(uint16_t *step_counter_wm, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_reset_step_counter bma423_reset_step_counter
* \code
* int8_t bma423_reset_step_counter(struct bma4_dev *dev);
* \endcode
* @details This API resets the counted steps of step counter.
*
* @param[in] dev : structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_reset_step_counter(struct bma4_dev *dev);
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_step_counter_output bma423_step_counter_output
* \code
* int8_t bma423_step_counter_output(uint32_t *step_count, struct bma4_dev *dev);
* \endcode
* @details This API gets the number of counted steps of the step counter
* feature from the sensor.
*
* @param[out] step_count : Pointer variable which stores counted steps
* read from the sensor.
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_step_counter_output(uint32_t *step_count, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiAct Activity Feature
* @brief Get output for activity feature of the sensor
*/
/*!
* \ingroup bma423ApiAct
* \page bma423_api_bma423_activity_output bma423_activity_output
* \code
* int8_t bma423_activity_output(uint8_t *activity, struct bma4_dev *dev);
* \endcode
* @details This API gets the output for activity feature.
*
* @param[out] activity : Pointer variable which stores activity output read
* from the sensor.
*
*@verbatim
* activity | State
* --------------|------------------------
* 0x00 | BMA423_USER_STATIONARY
* 0x01 | BMA423_USER_WALKING
* 0x02 | BMA423_USER_RUNNING
* 0x03 | BMA423_STATE_INVALID
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_activity_output(uint8_t *activity, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_stepcounter_get_parameter bma423_stepcounter_get_parameter
* \code
* int8_t bma423_stepcounter_get_parameter(struct bma423_stepcounter_settings *setting, struct bma4_dev *dev);
* \endcode
* @details This API gets the parameter1 to parameter7 settings of the step
* counter feature.
*
* @param[out] setting : Pointer to structure variable which stores the
* parameter1 to parameter7 read from the sensor.
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_stepcounter_get_parameter(struct bma423_stepcounter_settings *setting, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiStepC
* \page bma423_api_bma423_stepcounter_set_parameter bma423_stepcounter_set_parameter
* \code
* int8_t bma423_stepcounter_set_parameter(const struct bma423_stepcounter_settings *setting, struct bma4_dev *dev);
* \endcode
* @details This API sets the parameter1 to parameter7 settings of the step
* counter feature in the sensor.
*
* @param[in] setting : Pointer to structure variable which stores the
* parameter1 to parameter7 settings read from the sensor.
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_stepcounter_set_parameter(const struct bma423_stepcounter_settings *setting, struct bma4_dev *dev);
/**
* \ingroup bma421
* \defgroup bma421ApiStepD Step detector
* @brief Operations of step detector feature of the sensor
*/
/*!
* \ingroup bma421ApiStepD
* \page bma421_api_bma421_step_detector_enable bma421_step_detector_enable
* \code
* int8_t bma421_step_detector_enable(uint8_t enable, struct bma4_dev *dev);
* \endcode
* @details This API enables or disables the step detector feature in the
* sensor.
*
* @param[in] enable : Variable used to enable or disable step detector
*
*@verbatim
* enable | Macros
* --------|-------------------
* 0x00 | BMA4_DISABLE
* 0x01 | BMA4_ENABLE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_step_detector_enable(uint8_t enable, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiAnyMot Any motion Feature
* @brief Functions of Any motion feature of the sensor
*/
/*!
* \ingroup bma423ApiAnyMot
* \page bma423_api_bma423_set_any_motion_config bma423_set_any_motion_config
* \code
* int8_t bma423_set_any_motion_config(const struct bma423_anymotion_config *any_motion, struct bma4_dev *dev);
* \endcode
* @details This API sets the configuration of any-motion feature in the sensor
* This API enables/disables the any-motion feature according to the axis set.
*
* @param[in] any_mot : Pointer to structure variable to configure
* any-motion.
*
* @verbatim
* -------------------------------------------------------------------------
* Structure parameters | Description
* --------------------------------|----------------------------------------
* | Defines the number of
* | consecutive data points for
* | which the threshold condition
* duration | must be respected, for interrupt
* | assertion. It is expressed in
* | 50 Hz samples (20 ms).
* | Range is 0 to 163sec.
* | Default value is 5 = 100ms.
* --------------------------------|----------------------------------------
* | Slope threshold value for
* | Any-motion detection
* threshold | in 5.11g format.
* | Range is 0 to 1g.
* | Default value is 0xAA = 83mg.
* --------------------------------|----------------------------------------
* | Enables the feature on a per-axis
* axis_en | basis.
* ---------------------------------------------------------------------------
* @endverbatim
*
*@verbatim
* Value | axis_en
* ---------|-------------------------
* 0x00 | BMA423_DIS_ALL_AXIS
* 0x01 | BMA423_X_AXIS_EN
* 0x02 | BMA423_Y_AXIS_EN
* 0x04 | BMA423_Z_AXIS_EN
* 0x07 | BMA423_EN_ALL_AXIS
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_set_any_mot_config(const struct bma423_any_no_mot_config *any_mot, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiAnyMot
* \page bma423_api_bma423_get_any_motion_config bma423_get_any_motion_config
* \code
* int8_t bma423_get_any_motion_config(struct bma423_anymotion_config *any_motion, struct bma4_dev *dev);
* \endcode
* @details This API gets the configuration of any-motion feature from the
* sensor.
*
* @param[out] any_mot : Pointer to structure variable to configure
* any-motion.
*
* @verbatim
* -------------------------------------------------------------------------
* Structure parameters | Description
* --------------------------------|----------------------------------------
* | Defines the number of
* | consecutive data points for
* | which the threshold condition
* duration | must be respected, for interrupt
* | assertion. It is expressed in
* | 50 Hz samples (20 ms).
* | Range is 0 to 163sec.
* | Default value is 5 = 100ms.
* --------------------------------|----------------------------------------
* | Slope threshold value for
* | Any-motion detection
* threshold | in 5.11g format.
* | Range is 0 to 1g.
* | Default value is 0xAA = 83mg.
* --------------------------------|-----------------------------------------
* | Enables the feature on a per-axis
* axis_en | basis.
* ---------------------------------------------------------------------------
* @endverbatim
*
*@verbatim
* Value | axis_en
* ---------|-------------------------
* 0x00 | BMA423_DIS_ALL_AXIS
* 0x01 | BMA423_X_AXIS_EN
* 0x02 | BMA423_Y_AXIS_EN
* 0x04 | BMA423_Z_AXIS_EN
* 0x07 | BMA423_EN_ALL_AXIS
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_get_any_mot_config(struct bma423_any_no_mot_config *any_mot, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiNomot No-Motion Feature
* @brief Operations of no-motion feature of the sensor
*/
/*!
* \ingroup bma423ApiNomot
* \page bma423_api_bma423_set_no_motion_config bma423_set_no_motion_config
* \code
* int8_t bma423_set_no_motion_config(const struct bma423_nomotion_config *no_motion, struct bma4_dev *dev);
* \endcode
* @details This API sets the configuration of no-motion feature in the sensor
* This API enables/disables the no-motion feature according to the axis set.
*
* @param[in] no_mot : Pointer to structure variable to configure
* no-motion.
*
* @verbatim
* -------------------------------------------------------------------------
* Structure parameters | Description
* --------------------------------|----------------------------------------
* | Defines the number of
* | consecutive data points for
* | which the threshold condition
* duration | must be respected, for interrupt
* | assertion. It is expressed in
* | 50 Hz samples (20 ms).
* | Range is 0 to 163sec.
* | Default value is 5 = 100ms.
* --------------------------------|----------------------------------------
* | Slope threshold value for
* | No-motion detection
* threshold | in 5.11g format.
* | Range is 0 to 1g.
* | Default value is 0xAA = 83mg.
* --------------------------------|----------------------------------------
* | Enables the feature on a per-axis
* axis_en | basis.
* ---------------------------------------------------------------------------
* @endverbatim
*
*@verbatim
* Value | axis_en
* ---------|-------------------------
* 0x00 | BMA423_DIS_ALL_AXIS
* 0x01 | BMA423_X_AXIS_EN
* 0x02 | BMA423_Y_AXIS_EN
* 0x04 | BMA423_Z_AXIS_EN
* 0x07 | BMA423_EN_ALL_AXIS
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_set_no_mot_config(const struct bma423_any_no_mot_config *no_mot, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiNomot
* \page bma423_api_bma423_get_no_motion_config bma423_get_no_motion_config
* \code
* int8_t bma423_get_no_motion_config(struct bma423_nomotion_config *no_motion, struct bma4_dev *dev);
* \endcode
* @details This API gets the configuration of no-motion feature from the
* sensor.
*
* @param[out] no_mot : Pointer to structure variable to configure
* no-motion.
*
* @verbatim
* -------------------------------------------------------------------------
* Structure parameters | Description
* --------------------------------|----------------------------------------
* | Defines the number of
* | consecutive data points for
* | which the threshold condition
* duration | must be respected, for interrupt
* | assertion. It is expressed in
* | 50 Hz samples (20 ms).
* | Range is 0 to 163sec.
* | Default value is 5 = 100ms.
* --------------------------------|----------------------------------------
* | Slope threshold value for
* | No-motion detection
* threshold | in 5.11g format.
* | Range is 0 to 1g.
* | Default value is 0xAA = 83mg.
* --------------------------------|-----------------------------------------
* | Enables the feature on a per-axis
* axis_en | basis.
* ---------------------------------------------------------------------------
* @endverbatim
*
*@verbatim
* Value | axis_en
* ---------|-------------------------
* 0x00 | BMA423_DIS_ALL_AXIS
* 0x01 | BMA423_X_AXIS_EN
* 0x02 | BMA423_Y_AXIS_EN
* 0x04 | BMA423_Z_AXIS_EN
* 0x07 | BMA423_EN_ALL_AXIS
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_get_no_mot_config(struct bma423_any_no_mot_config *no_mot, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiTap Single Tap and Double tap
* @brief Single and Double tap feature operations
*/
/*!
* \ingroup bma423ApiTap
* \page bma423_api_bma423_single_tap_set_sensitivity bma423_single_tap_set_sensitivity
* \code
* int8_t bma423_single_tap_set_sensitivity(uint8_t sensitivity, struct bma4_dev *dev);
* \endcode
* @details This API sets the sensitivity of single tap wake-up feature in the sensor
*
* @param[in] sensitivity : Variable used to specify the sensitivity of the
* Wake up feature.
*
*@verbatim
* Value | Sensitivity
* --------|-------------------------
* 0x00 | MOST SENSITIVE
* 0x07 | LEAST SENSITIVE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_single_tap_set_sensitivity(uint8_t sensitivity, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiTap
* \page bma423_api_bma423_double_tap_set_sensitivity bma423_double_tap_set_sensitivity
* \code
* int8_t bma423_double_tap_set_sensitivity(uint8_t sensitivity, struct bma4_dev *dev);
* \endcode
* @details This API sets the sensitivity of double tap wake-up feature in the sensor
*
* @param[in] sensitivity : Variable used to specify the sensitivity of the
* Wake up feature.
*
*@verbatim
* Value | Sensitivity
* --------|-------------------------
* 0x00 | MOST SENSITIVE
* 0x07 | LEAST SENSITIVE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_double_tap_set_sensitivity(uint8_t sensitivity, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiTap
* \page bma423_api_bma423_single_tap_get_sensitivity bma423_single_tap_get_sensitivity
* \code
* int8_t bma423_single_tap_get_sensitivity(uint8_t *sensitivity, struct bma4_dev *dev);
* \endcode
* @details This API gets the sensitivity of single tap wake up feature in the sensor
*
* @param[out] sensitivity : Pointer variable which stores the sensitivity
* value read from the sensor.
*
* @verbatim
* Value | Sensitivity
* --------|-------------------------
* 0x00 | MOST SENSITIVE
* 0x07 | LEAST SENSITIVE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_single_tap_get_sensitivity(uint8_t *sensitivity, struct bma4_dev *dev);
/*!
* \ingroup bma423ApiTap
* \page bma423_api_bma423_double_tap_get_sensitivity bma423_double_tap_get_sensitivity
* \code
* int8_t bma423_double_tap_get_sensitivity(uint8_t *sensitivity, struct bma4_dev *dev);
* \endcode
* @details This API gets the sensitivity of double tap wake up feature in the sensor
*
* @param[out] sensitivity : Pointer variable which stores the sensitivity
* value read from the sensor.
*
*@verbatim
* Value | Sensitivity
* --------|-------------------------
* 0x00 | MOST SENSITIVE
* 0x07 | LEAST SENSITIVE
*@endverbatim
*
* @param[in] dev : Structure instance of bma4_dev
*
* @return Result of API execution status
* @retval 0 -> Success
* @retval < 0 -> Fail
*/
int8_t bma423_double_tap_get_sensitivity(uint8_t *sensitivity, struct bma4_dev *dev);
/**
* \ingroup bma423
* \defgroup bma423ApiVersionConfig Version Config
* @brief Get version configuration of the sensor
*/
/*!
* \ingroup bma423ApiVersionConfig
* \page bma423_api_bma422_huawei_get_version_config bma423_get_version_config
* \code
* int8_t bma423_get_version_config(uint16_t *config_major, uint16_t *config_minor, struct bma4_dev *dev);
* \endcode
* @details This API is used to get the config file major and minor information.
*
* @param[in] dev : Structure instance of bma4_dev.
* @param[out] config_major : Pointer to data buffer to store the config major.
* @param[out] config_minor : Pointer to data buffer to store the config minor.
*
* @retval BMA4_OK - Success.
* @retval BMA4_E_NULL_PTR - Error: Null pointer error
*/
int8_t bma423_get_version_config(uint16_t *config_major, uint16_t *config_minor, struct bma4_dev *dev);
#ifdef __cplusplus
}
#endif /*End of CPP guard */
#endif /*End of header guard macro */
Reference in a new issue View git blame Copy permalink