scott/InfiniTime
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases 1 Wiki Activity
InfiniTime/src/CMakeLists.txt

1164 lines
56 KiB
CMake
Raw Normal View History

Set minimum version of cmake to 3.10
2020-01-18 14:52:33 -05:00
cmake_minimum_required(VERSION 3.10)
Initial commit
2019-11-17 14:47:04 -05:00
project(pinetime-app C CXX ASM)
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
Initial commit
2019-11-17 14:47:04 -05:00
# define some variables just for this example to determine file locations
set(NRF_PROJECT_NAME pinetime-app)
set(NRF_BOARD pca10040)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# check if all the necessary tools paths have been provided.
if (NOT NRF5_SDK_PATH)
message(FATAL_ERROR "The path to the nRF5 SDK (NRF5_SDK_PATH) must be set.")
endif ()
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (DEFINED ARM_NONE_EABI_TOOLCHAIN_PATH)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(ARM_NONE_EABI_TOOLCHAIN_BIN_PATH ${ARM_NONE_EABI_TOOLCHAIN_PATH}/bin)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
if (NOT NRF_TARGET MATCHES "nrf52")
message(FATAL_ERROR "Only rRF52 boards are supported right now")
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Setup toolchain
include(${CMAKE_SOURCE_DIR}/cmake-nRF5x/arm-gcc-toolchain.cmake)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (NOT DEFINED ARM_GCC_TOOLCHAIN)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
message(FATAL_ERROR "The toolchain must be set up before calling this macro")
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(CMAKE_OSX_SYSROOT "/")
set(CMAKE_OSX_DEPLOYMENT_TARGET "")
set(SDK_SOURCE_FILES
# Startup
"${NRF5_SDK_PATH}/modules/nrfx/mdk/system_nrf52.c"
"${NRF5_SDK_PATH}/modules/nrfx/mdk/gcc_startup_nrf52.S"
# Base SDK
"${NRF5_SDK_PATH}/components/boards/boards.c"
"${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_clock.c"
add non-blocking motor controller
2021-01-15 22:11:53 -05:00
"${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_clock.h"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_clock.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_gpiote.c"
"${NRF5_SDK_PATH}/modules/nrfx/soc/nrfx_atomic.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_saadc.c"
add non-blocking motor controller
2021-01-15 22:11:53 -05:00
"${NRF5_SDK_PATH}/components/libraries/timer/app_timer.h"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# FreeRTOS
${NRF5_SDK_PATH}/external/freertos/source/croutine.c
${NRF5_SDK_PATH}/external/freertos/source/event_groups.c
Fix/Workaround a memory leak each time a device connects to BLE.
2020-07-11 14:50:40 -04:00
${NRF5_SDK_PATH}/external/freertos/source/portable/MemMang/heap_4.c
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
${NRF5_SDK_PATH}/external/freertos/source/list.c
${NRF5_SDK_PATH}/external/freertos/source/queue.c
${NRF5_SDK_PATH}/external/freertos/source/stream_buffer.c
${NRF5_SDK_PATH}/external/freertos/source/tasks.c
${NRF5_SDK_PATH}/external/freertos/source/timers.c
${NRF5_SDK_PATH}/components/libraries/timer/app_timer_freertos.c
# Libs
"${NRF5_SDK_PATH}/components/libraries/atomic/nrf_atomic.c"
"${NRF5_SDK_PATH}/components/libraries/balloc/nrf_balloc.c"
"${NRF5_SDK_PATH}/components/libraries/util/nrf_assert.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error_weak.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error_handler_gcc.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_util_platform.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_backend_rtt.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_backend_serial.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_default_backends.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_frontend.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_str_formatter.c"
"${NRF5_SDK_PATH}/components/libraries/memobj/nrf_memobj.c"
"${NRF5_SDK_PATH}/components/libraries/ringbuf/nrf_ringbuf.c"
"${NRF5_SDK_PATH}/components/libraries/strerror/nrf_strerror.c"
# Segger RTT
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c"
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT.c"
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT_printf.c"
# Other
"${NRF5_SDK_PATH}/external/utf_converter/utf.c"
"${NRF5_SDK_PATH}/external/fprintf/nrf_fprintf.c"
"${NRF5_SDK_PATH}/external/fprintf/nrf_fprintf_format.c"
# TWI
TwiMaster is now based on the NRFX TWI driver, as it handles more edge cases and workarounds for errors on the bus. Reset the TWI bus after the soft-reset of the motion sensor to workaround issues on the TWI bus.
2021-04-08 14:07:24 -04:00
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twim.c"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# GPIOTE
"${NRF5_SDK_PATH}/components/libraries/gpiote/app_gpiote.c"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
First quick'n'dirty integration of LittleVGL. Needs some cleaning.
2020-02-08 12:01:02 -05:00
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
set(TINYCRYPT_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/ext/tinycrypt/src/aes_encrypt.c
libs/mynewt-nimble/ext/tinycrypt/src/utils.c
WIP Refactor ble advertising Refactor ble advertising based on ble standards and conventions. Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 16:50:04 -04:00
libs/mynewt-nimble/ext/tinycrypt/src/cmac_mode.c
libs/mynewt-nimble/ext/tinycrypt/src/ecc.c
libs/mynewt-nimble/ext/tinycrypt/src/ecc_dh.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
set(NIMBLE_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/porting/npl/freertos/src/nimble_port_freertos.c
libs/mynewt-nimble/porting/npl/freertos/src/npl_os_freertos.c
libs/mynewt-nimble/nimble/host/src/ble_hs.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_evt.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap_sig_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap_sig.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap.c
libs/mynewt-nimble/nimble/host/src/ble_hs_mbuf.c
libs/mynewt-nimble/nimble/host/src/ble_sm.c
WIP Refactor ble advertising Refactor ble advertising based on ble standards and conventions. Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 16:50:04 -04:00
libs/mynewt-nimble/nimble/host/src/ble_sm_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_sm_lgcy.c
libs/mynewt-nimble/nimble/host/src/ble_sm_alg.c
libs/mynewt-nimble/nimble/host/src/ble_sm_sc.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/nimble/host/src/ble_gap.c
libs/mynewt-nimble/nimble/host/src/ble_gatts.c
libs/mynewt-nimble/nimble/host/src/ble_gattc.c
libs/mynewt-nimble/nimble/host/src/ble_hs_conn.c
libs/mynewt-nimble/nimble/host/src/ble_att_svr.c
libs/mynewt-nimble/nimble/host/src/ble_store.c
libs/mynewt-nimble/nimble/host/src/ble_store_util.c
libs/mynewt-nimble/nimble/host/src/ble_hs_pvcy.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci.c
libs/mynewt-nimble/nimble/host/src/ble_hs_log.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_util.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_hs_cfg.c
libs/mynewt-nimble/nimble/host/src/ble_uuid.c
libs/mynewt-nimble/nimble/host/src/ble_hs_id.c
libs/mynewt-nimble/nimble/host/src/ble_hs_misc.c
libs/mynewt-nimble/nimble/host/src/ble_att.c
libs/mynewt-nimble/nimble/host/src/ble_att_clt.c
libs/mynewt-nimble/nimble/host/src/ble_att_svr.c
libs/mynewt-nimble/nimble/host/src/ble_att_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_hs_atomic.c
libs/mynewt-nimble/nimble/host/src/ble_hs_adv.c
libs/mynewt-nimble/nimble/host/src/ble_hs_flow.c
libs/mynewt-nimble/nimble/host/src/ble_hs_mqueue.c
libs/mynewt-nimble/nimble/host/src/ble_hs_stop.c
libs/mynewt-nimble/nimble/host/src/ble_hs_startup.c
libs/mynewt-nimble/nimble/host/store/ram/src/ble_store_ram.c
libs/mynewt-nimble/nimble/host/src/ble_monitor.c
libs/mynewt-nimble/nimble/transport/ram/src/ble_hci_ram.c
libs/mynewt-nimble/nimble/controller/src/ble_ll.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_rand.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_conn.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_ctrl.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_hci.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_conn_hci.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_utils.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_scan.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_whitelist.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_adv.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_sched.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_supp_cmd.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_hci_ev.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_rfmgmt.c
Connect and bond with a passkey This commit adds the following: Passkey pairing - passkey is displayed on watch Swipe down to clear passkey screen Connection encryption Connection bonding Automatic reconnects to a bonded peripheral Trusted device on Android Note that persisting the bond between reboots is NOT included in this commit. Therefore, rebooting the watch will cause reconnect failures. You must delete the bond from the phone to reconnect/pair.
2021-10-30 14:02:39 -04:00
libs/mynewt-nimble/nimble/controller/src/ble_ll_resolv.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/porting/nimble/src/os_cputime.c
libs/mynewt-nimble/porting/nimble/src/os_cputime_pwr2.c
libs/mynewt-nimble/porting/nimble/src/os_mbuf.c
libs/mynewt-nimble/porting/nimble/src/os_mempool.c
libs/mynewt-nimble/porting/nimble/src/hal_timer.c
libs/mynewt-nimble/porting/nimble/src/mem.c
libs/mynewt-nimble/porting/nimble/src/endian.c
libs/mynewt-nimble/porting/nimble/src/os_msys_init.c
libs/mynewt-nimble/nimble/drivers/nrf52/src/ble_hw.c
libs/mynewt-nimble/nimble/drivers/nrf52/src/ble_phy.c
libs/mynewt-nimble/nimble/host/services/gap/src/ble_svc_gap.c
libs/mynewt-nimble/nimble/host/services/gatt/src/ble_svc_gatt.c
libs/mynewt-nimble/nimble/host/util/src/addr.c
)
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
set(LITTLEFS_SRC
libs/littlefs/lfs_util.h
libs/littlefs/lfs.h
libs/littlefs/lfs_util.c
libs/littlefs/lfs.c
)
First quick'n'dirty integration of LittleVGL. Needs some cleaning.
2020-02-08 12:01:02 -05:00
set(LVGL_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lv_conf.h
libs/lvgl/lvgl.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lvgl.h
libs/lvgl/src/lv_api_map.h
libs/lvgl/src/lv_conf_internal.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_disp.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_core/lv_group.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_indev.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_core/lv_obj.h
libs/lvgl/src/lv_core/lv_obj_style_dec.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_refr.h
libs/lvgl/src/lv_core/lv_style.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw.h
libs/lvgl/src/lv_draw/lv_draw_arc.h
libs/lvgl/src/lv_draw/lv_draw_blend.h
libs/lvgl/src/lv_draw/lv_draw_img.h
libs/lvgl/src/lv_draw/lv_draw_label.h
libs/lvgl/src/lv_draw/lv_draw_line.h
libs/lvgl/src/lv_draw/lv_draw_mask.h
libs/lvgl/src/lv_draw/lv_draw_rect.h
libs/lvgl/src/lv_draw/lv_draw_triangle.h
libs/lvgl/src/lv_draw/lv_img_buf.h
libs/lvgl/src/lv_draw/lv_img_cache.h
libs/lvgl/src/lv_draw/lv_img_decoder.h
libs/lvgl/src/lv_font/lv_font.h
libs/lvgl/src/lv_font/lv_font_fmt_txt.h
libs/lvgl/src/lv_font/lv_font_loader.h
libs/lvgl/src/lv_font/lv_symbol_def.h
libs/lvgl/src/lv_hal/lv_hal.h
libs/lvgl/src/lv_hal/lv_hal_disp.h
libs/lvgl/src/lv_hal/lv_hal_indev.h
libs/lvgl/src/lv_hal/lv_hal_tick.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_anim.h
libs/lvgl/src/lv_misc/lv_area.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_async.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_bidi.h
libs/lvgl/src/lv_misc/lv_color.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_debug.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_fs.h
libs/lvgl/src/lv_misc/lv_gc.h
libs/lvgl/src/lv_misc/lv_ll.h
libs/lvgl/src/lv_misc/lv_log.h
libs/lvgl/src/lv_misc/lv_math.h
libs/lvgl/src/lv_misc/lv_mem.h
libs/lvgl/src/lv_misc/lv_printf.h
libs/lvgl/src/lv_misc/lv_task.h
libs/lvgl/src/lv_misc/lv_templ.h
libs/lvgl/src/lv_misc/lv_txt.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_txt_ap.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_types.h
libs/lvgl/src/lv_misc/lv_utils.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_themes/lv_theme.h
libs/lvgl/src/lv_themes/lv_theme_empty.h
libs/lvgl/src/lv_themes/lv_theme_material.h
#libs/lvgl/src/lv_themes/lv_theme_mono.h
#libs/lvgl/src/lv_themes/lv_theme_template.h
libs/lvgl/src/lv_widgets/lv_arc.h
libs/lvgl/src/lv_widgets/lv_bar.h
libs/lvgl/src/lv_widgets/lv_btn.h
libs/lvgl/src/lv_widgets/lv_btnmatrix.h
libs/lvgl/src/lv_widgets/lv_calendar.h
libs/lvgl/src/lv_widgets/lv_canvas.h
libs/lvgl/src/lv_widgets/lv_chart.h
libs/lvgl/src/lv_widgets/lv_checkbox.h
libs/lvgl/src/lv_widgets/lv_cont.h
libs/lvgl/src/lv_widgets/lv_cpicker.h
libs/lvgl/src/lv_widgets/lv_dropdown.h
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
libs/lvgl/src/lv_widgets/lv_gauge.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_widgets/lv_img.h
libs/lvgl/src/lv_widgets/lv_imgbtn.h
libs/lvgl/src/lv_widgets/lv_keyboard.h
libs/lvgl/src/lv_widgets/lv_label.h
libs/lvgl/src/lv_widgets/lv_led.h
libs/lvgl/src/lv_widgets/lv_line.h
libs/lvgl/src/lv_widgets/lv_linemeter.h
libs/lvgl/src/lv_widgets/lv_list.h
libs/lvgl/src/lv_widgets/lv_msgbox.h
libs/lvgl/src/lv_widgets/lv_objmask.h
libs/lvgl/src/lv_widgets/lv_objx_templ.h
libs/lvgl/src/lv_widgets/lv_page.h
libs/lvgl/src/lv_widgets/lv_roller.h
libs/lvgl/src/lv_widgets/lv_slider.h
libs/lvgl/src/lv_widgets/lv_spinbox.h
libs/lvgl/src/lv_widgets/lv_spinner.h
libs/lvgl/src/lv_widgets/lv_switch.h
libs/lvgl/src/lv_widgets/lv_table.h
libs/lvgl/src/lv_widgets/lv_tabview.h
libs/lvgl/src/lv_widgets/lv_textarea.h
libs/lvgl/src/lv_widgets/lv_tileview.h
libs/lvgl/src/lv_widgets/lv_win.h
libs/lvgl/src/lv_core/lv_disp.c
libs/lvgl/src/lv_core/lv_group.c
libs/lvgl/src/lv_core/lv_indev.c
libs/lvgl/src/lv_core/lv_obj.c
libs/lvgl/src/lv_core/lv_refr.c
libs/lvgl/src/lv_core/lv_style.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_arc.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw_blend.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_img.c
libs/lvgl/src/lv_draw/lv_draw_label.c
libs/lvgl/src/lv_draw/lv_draw_line.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw_mask.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_rect.c
libs/lvgl/src/lv_draw/lv_draw_triangle.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_img_buf.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_img_cache.c
libs/lvgl/src/lv_draw/lv_img_decoder.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_font/lv_font.c
#libs/lvgl/src/lv_font/lv_font_dejavu_16_persian_hebrew.c
libs/lvgl/src/lv_font/lv_font_fmt_txt.c
libs/lvgl/src/lv_font/lv_font_loader.c
# LVGL Fonts
libs/lvgl/src/lv_font/lv_font_montserrat_14.c
libs/lvgl/src/lv_font/lv_font_montserrat_18.c
libs/lvgl/src/lv_font/lv_font_montserrat_22.c
libs/lvgl/src/lv_font/lv_font_montserrat_28.c
#
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_hal/lv_hal_disp.c
libs/lvgl/src/lv_hal/lv_hal_indev.c
libs/lvgl/src/lv_hal/lv_hal_tick.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_anim.c
libs/lvgl/src/lv_misc/lv_area.c
libs/lvgl/src/lv_misc/lv_async.c
libs/lvgl/src/lv_misc/lv_bidi.c
libs/lvgl/src/lv_misc/lv_color.c
libs/lvgl/src/lv_misc/lv_debug.c
libs/lvgl/src/lv_misc/lv_fs.c
libs/lvgl/src/lv_misc/lv_gc.c
libs/lvgl/src/lv_misc/lv_ll.c
libs/lvgl/src/lv_misc/lv_log.c
libs/lvgl/src/lv_misc/lv_math.c
libs/lvgl/src/lv_misc/lv_mem.c
libs/lvgl/src/lv_misc/lv_printf.c
libs/lvgl/src/lv_misc/lv_task.c
libs/lvgl/src/lv_misc/lv_templ.c
libs/lvgl/src/lv_misc/lv_txt.c
libs/lvgl/src/lv_misc/lv_txt_ap.c
libs/lvgl/src/lv_misc/lv_utils.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_themes/lv_theme.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_themes/lv_theme_empty.c
libs/lvgl/src/lv_themes/lv_theme_material.c
#libs/lvgl/src/lv_themes/lv_theme_mono.c
#libs/lvgl/src/lv_themes/lv_theme_template.c
libs/lvgl/src/lv_widgets/lv_arc.c
libs/lvgl/src/lv_widgets/lv_bar.c
libs/lvgl/src/lv_widgets/lv_btn.c
libs/lvgl/src/lv_widgets/lv_btnmatrix.c
libs/lvgl/src/lv_widgets/lv_calendar.c
libs/lvgl/src/lv_widgets/lv_canvas.c
libs/lvgl/src/lv_widgets/lv_chart.c
libs/lvgl/src/lv_widgets/lv_checkbox.c
libs/lvgl/src/lv_widgets/lv_cont.c
libs/lvgl/src/lv_widgets/lv_cpicker.c
libs/lvgl/src/lv_widgets/lv_dropdown.c
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
libs/lvgl/src/lv_widgets/lv_gauge.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_widgets/lv_img.c
libs/lvgl/src/lv_widgets/lv_imgbtn.c
libs/lvgl/src/lv_widgets/lv_keyboard.c
libs/lvgl/src/lv_widgets/lv_label.c
libs/lvgl/src/lv_widgets/lv_led.c
libs/lvgl/src/lv_widgets/lv_line.c
libs/lvgl/src/lv_widgets/lv_linemeter.c
libs/lvgl/src/lv_widgets/lv_list.c
libs/lvgl/src/lv_widgets/lv_msgbox.c
libs/lvgl/src/lv_widgets/lv_objmask.c
libs/lvgl/src/lv_widgets/lv_objx_templ.c
libs/lvgl/src/lv_widgets/lv_page.c
libs/lvgl/src/lv_widgets/lv_roller.c
libs/lvgl/src/lv_widgets/lv_slider.c
libs/lvgl/src/lv_widgets/lv_spinbox.c
libs/lvgl/src/lv_widgets/lv_spinner.c
libs/lvgl/src/lv_widgets/lv_switch.c
libs/lvgl/src/lv_widgets/lv_table.c
libs/lvgl/src/lv_widgets/lv_tabview.c
libs/lvgl/src/lv_widgets/lv_textarea.c
libs/lvgl/src/lv_widgets/lv_tileview.c
libs/lvgl/src/lv_widgets/lv_win.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Initial commit
2019-11-17 14:47:04 -05:00
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
set(QCBOR_SRC
libs/QCBOR/src/ieee754.c
libs/QCBOR/src/qcbor_decode.c
libs/QCBOR/src/qcbor_encode.c
libs/QCBOR/src/qcbor_err_to_str.c
libs/QCBOR/src/UsefulBuf.c
)
Display battery level and BLE connection status using icon on Clock screen.
2020-03-14 11:33:47 -04:00
list(APPEND IMAGE_FILES
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
displayapp/icons/battery/os_battery_error.c
displayapp/icons/battery/os_battery_100.c
displayapp/icons/battery/os_battery_090.c
displayapp/icons/battery/os_battery_080.c
displayapp/icons/battery/os_battery_070.c
displayapp/icons/battery/os_battery_060.c
displayapp/icons/battery/os_battery_050.c
displayapp/icons/battery/os_battery_040.c
displayapp/icons/battery/os_battery_030.c
displayapp/icons/battery/os_battery_020.c
displayapp/icons/battery/os_battery_010.c
displayapp/icons/battery/os_battery_005.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
displayapp/icons/battery/os_batterycharging_100.c
displayapp/icons/battery/os_batterycharging_090.c
displayapp/icons/battery/os_batterycharging_080.c
displayapp/icons/battery/os_batterycharging_070.c
displayapp/icons/battery/os_batterycharging_060.c
displayapp/icons/battery/os_batterycharging_050.c
displayapp/icons/battery/os_batterycharging_040.c
displayapp/icons/battery/os_batterycharging_030.c
displayapp/icons/battery/os_batterycharging_020.c
displayapp/icons/battery/os_batterycharging_010.c
displayapp/icons/battery/os_batterycharging_005.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
displayapp/icons/bluetooth/os_bt_connected.c
displayapp/icons/bluetooth/os_bt_disconnected.c
Merge branch piggz/nav into develop: - fix conflict - add a icon for the navigation app.
2021-01-20 15:34:09 -05:00
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Display battery level and BLE connection status using icon on Clock screen.
2020-03-14 11:33:47 -04:00
Initial commit
2019-11-17 14:47:04 -05:00
list(APPEND SOURCE_FILES
Disable sleep mode on the SPI NOR Flash when the version is unknown. This is because the current bootloader (which does not exposes its version) cannot initialize the chip when it's in sleep mode. This feature will be re-enabled when the bootloader expses it's version.
2020-10-27 14:38:45 -04:00
BootloaderVersion.cpp
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/NrfLogger.cpp
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/DisplayApp.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Screen.cpp
displayapp/screens/Clock.cpp
displayapp/screens/Tile.cpp
displayapp/screens/Meter.cpp
displayapp/screens/InfiniPaint.cpp
Addition of new files in MakeList added Paddle.cpp and Paddle.h
2020-12-03 09:16:36 -05:00
displayapp/screens/Paddle.cpp
Basic logic done. Need to change the timer source to get ms. Also need to replace with paddle app in displayApp.cpp and ApplicationList.cpp later.
2021-03-11 04:54:14 -05:00
displayapp/screens/StopWatch.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/BatteryIcon.cpp
displayapp/screens/BleIcon.cpp
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/NotificationIcon.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Brightness.cpp
displayapp/screens/SystemInfo.cpp
displayapp/screens/Label.cpp
displayapp/screens/FirmwareUpdate.cpp
displayapp/screens/Music.cpp
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
displayapp/screens/Weather.cpp
Merge branch piggz/nav into develop: - fix conflict - add a icon for the navigation app.
2021-01-20 15:34:09 -05:00
displayapp/screens/Navigation.cpp
add basic metronome app (#409) * add basic metronome app * add bpb, tap to bpm, update widgets * use event pressed for bpm tap * move case statement break to the right place * narrow bpm selection range, override touch events * fix arc knob style * re-enable sleeping in destructor
2021-06-12 09:06:58 -04:00
displayapp/screens/Metronome.cpp
Merge branch 'develop' into motion-sensor # Conflicts: # src/CMakeLists.txt # src/displayapp/Apps.h # src/displayapp/DisplayApp.cpp # src/displayapp/DisplayApp.h # src/displayapp/lv_pinetime_theme.c # src/displayapp/screens/ApplicationList.cpp # src/drivers/TwiMaster.cpp # src/systemtask/SystemTask.h
2021-04-09 15:16:21 -04:00
displayapp/screens/Motion.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/FirmwareValidation.cpp
displayapp/screens/ApplicationList.cpp
[WIP] New notification app that uses software scrolling effect.
2020-10-18 11:35:36 -04:00
displayapp/screens/Notifications.cpp
adds 2048 clone game styles table reads touch events allows moving tiles allows merging tiles improves tile movement allows merging tiles adds score display implements color edit comments adjust game logic disallows double merges
2021-01-02 15:08:12 -05:00
displayapp/screens/Twos.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
displayapp/screens/HeartRate.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
displayapp/screens/Motion.cpp
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
displayapp/screens/FlashLight.cpp
displayapp/screens/List.cpp
displayapp/screens/BatteryInfo.cpp
New Steps app Settings to set the steps goal More detail in Motion app New 42px Font
2021-04-19 10:28:38 -04:00
displayapp/screens/Steps.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
displayapp/screens/Timer.cpp
Connect and bond with a passkey This commit adds the following: Passkey pairing - passkey is displayed on watch Swipe down to clear passkey screen Connection encryption Connection bonding Automatic reconnects to a bonded peripheral Trusted device on Android Note that persisting the bond between reboots is NOT included in this commit. Therefore, rebooting the watch will cause reconnect failures. You must delete the bond from the phone to reconnect/pair.
2021-10-30 14:02:39 -04:00
displayapp/screens/PassKey.cpp
Automatic error detection
2021-08-18 08:23:30 -04:00
displayapp/screens/Error.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
displayapp/screens/Alarm.cpp
Move radio button styling to a single place
2021-09-22 19:53:10 -04:00
displayapp/screens/Styles.cpp
Settings : use enums instead of ints to store colors. Group all PTS settings into a struct. PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication. Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 15:02:11 -04:00
displayapp/Colors.cpp
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
## Settings
displayapp/screens/settings/QuickSettings.cpp
displayapp/screens/settings/Settings.cpp
displayapp/screens/settings/SettingWatchFace.cpp
displayapp/screens/settings/SettingTimeFormat.cpp
displayapp/screens/settings/SettingWakeUp.cpp
displayapp/screens/settings/SettingDisplay.cpp
New Steps app Settings to set the steps goal More detail in Motion app New 42px Font
2021-04-19 10:28:38 -04:00
displayapp/screens/settings/SettingSteps.cpp
PineTimeStyle color picker initial commit
2021-06-24 13:15:23 -04:00
displayapp/screens/settings/SettingPineTimeStyle.cpp
Include new screens in CMakeLists.txt
2021-07-09 08:14:17 -04:00
displayapp/screens/settings/SettingSetDate.cpp
displayapp/screens/settings/SettingSetTime.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
## Watch faces
displayapp/icons/bg_clock.c
displayapp/screens/WatchFaceAnalog.cpp
displayapp/screens/WatchFaceDigital.cpp
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
displayapp/screens/PineTimeStyle.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
##
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
main.cpp
drivers/St7789.cpp
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
drivers/Watchdog.cpp
drivers/DebugPins.cpp
drivers/InternalFlash.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
drivers/Hrs3300.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.cpp
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/battery/BatteryController.cpp
components/ble/BleController.cpp
components/ble/NotificationManager.cpp
components/datetime/DateTimeController.cpp
components/brightness/BrightnessController.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/NimbleController.cpp
components/ble/DeviceInformationService.cpp
components/ble/CurrentTimeClient.cpp
components/ble/AlertNotificationClient.cpp
components/ble/DfuService.cpp
components/ble/CurrentTimeService.cpp
components/ble/AlertNotificationService.cpp
components/ble/MusicService.cpp
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/ble/weather/WeatherService.cpp
Merge branch piggz/nav into develop: - fix conflict - add a icon for the navigation app.
2021-01-20 15:34:09 -05:00
components/ble/NavigationService.cpp
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
displayapp/fonts/lv_font_navi_80.c
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/BatteryInformationService.cpp
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/ImmediateAlertService.cpp
Refactoring of BLE service discovery : it is now implemented into the classes of the services.
2020-10-29 11:06:01 -04:00
components/ble/ServiceDiscovery.cpp
Add heart rate BLE service.
2021-01-17 10:34:14 -05:00
components/ble/HeartRateService.cpp
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/firmwarevalidator/FirmwareValidator.cpp
add motorcontroller to cmake
2021-01-15 22:46:03 -05:00
components/motor/MotorController.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/settings/Settings.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.cpp
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
components/fs/FS.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/Cst816s.cpp
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/LittleVgl.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
displayapp/fonts/jetbrains_mono_extrabold_compressed.c
displayapp/fonts/jetbrains_mono_bold_20.c
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
displayapp/fonts/jetbrains_mono_76.c
New Steps app Settings to set the steps goal More detail in Motion app New 42px Font
2021-04-19 10:28:38 -04:00
displayapp/fonts/jetbrains_mono_42.c
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
displayapp/fonts/lv_font_sys_48.c
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
displayapp/fonts/open_sans_light.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
displayapp/lv_pinetime_theme.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
Renamed SystemTask/ to systemtask/
2020-10-02 14:45:21 -04:00
systemtask/SystemTask.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/TwiMaster.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
components/heartrate/HeartRateController.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Initial commit
2019-11-17 14:47:04 -05:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
list(APPEND RECOVERY_SOURCE_FILES
BootloaderVersion.cpp
logging/NrfLogger.cpp
displayapp/DisplayAppRecovery.cpp
main.cpp
drivers/St7789.cpp
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
drivers/Watchdog.cpp
drivers/DebugPins.cpp
drivers/InternalFlash.cpp
drivers/Hrs3300.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.cpp
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/battery/BatteryController.cpp
components/ble/BleController.cpp
components/ble/NotificationManager.cpp
components/datetime/DateTimeController.cpp
components/brightness/BrightnessController.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/NimbleController.cpp
components/ble/DeviceInformationService.cpp
components/ble/CurrentTimeClient.cpp
components/ble/AlertNotificationClient.cpp
components/ble/DfuService.cpp
components/ble/CurrentTimeService.cpp
components/ble/AlertNotificationService.cpp
components/ble/MusicService.cpp
Fixed recovery build
2021-11-28 12:13:28 -05:00
components/ble/weather/WeatherService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/BatteryInformationService.cpp
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/ImmediateAlertService.cpp
components/ble/ServiceDiscovery.cpp
components/ble/NavigationService.cpp
components/ble/HeartRateService.cpp
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/firmwarevalidator/FirmwareValidator.cpp
Merge branch 'develop' of github.com:JF002/Pinetime into develop # Conflicts: # src/main.cpp # src/systemtask/SystemTask.h
2021-03-20 06:41:49 -04:00
components/settings/Settings.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
drivers/Cst816s.cpp
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
systemtask/SystemTask.cpp
drivers/TwiMaster.cpp
components/gfx/Gfx.cpp
components/rle/RleDecoder.cpp
components/heartrate/HeartRateController.cpp
heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
components/motor/MotorController.cpp
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
components/fs/FS.cpp
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
list(APPEND RECOVERYLOADER_SOURCE_FILES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
# FreeRTOS
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/NrfLogger.cpp
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/rle/RleDecoder.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/gfx/Gfx.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/St7789.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/brightness/BrightnessController.cpp
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
recoveryLoader.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
Initial commit
2019-11-17 14:47:04 -05:00
set(INCLUDE_FILES
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
Disable sleep mode on the SPI NOR Flash when the version is unknown. This is because the current bootloader (which does not exposes its version) cannot initialize the chip when it's in sleep mode. This feature will be re-enabled when the bootloader expses it's version.
2020-10-27 14:38:45 -04:00
BootloaderVersion.h
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/Logger.h
logging/NrfLogger.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/DisplayApp.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
displayapp/Messages.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/TouchEvents.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Screen.h
displayapp/screens/Clock.h
displayapp/screens/Tile.h
displayapp/screens/Meter.h
displayapp/screens/InfiniPaint.h
Basic logic done. Need to change the timer source to get ms. Also need to replace with paddle app in displayApp.cpp and ApplicationList.cpp later.
2021-03-11 04:54:14 -05:00
displayapp/screens/StopWatch.h
Addition of new files in MakeList added Paddle.cpp and Paddle.h
2020-12-03 09:16:36 -05:00
displayapp/screens/Paddle.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/DropDownDemo.h
displayapp/screens/BatteryIcon.h
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/BleIcon.h
displayapp/screens/NotificationIcon.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Brightness.h
displayapp/screens/SystemInfo.h
displayapp/screens/ScreenList.h
displayapp/screens/Label.h
displayapp/screens/FirmwareUpdate.h
displayapp/screens/FirmwareValidation.h
displayapp/screens/ApplicationList.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/Apps.h
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/Notifications.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
displayapp/screens/HeartRate.h
add basic metronome app (#409) * add basic metronome app * add bpb, tap to bpm, update widgets * use event pressed for bpm tap * move case statement break to the right place * narrow bpm selection range, override touch events * fix arc knob style * re-enable sleeping in destructor
2021-06-12 09:06:58 -04:00
displayapp/screens/Metronome.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
displayapp/screens/Motion.h
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
displayapp/screens/Timer.h
Created basic alarm app
2021-09-10 18:40:13 -04:00
displayapp/screens/Alarm.h
Settings : use enums instead of ints to store colors. Group all PTS settings into a struct. PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication. Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 15:02:11 -04:00
displayapp/Colors.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/St7789.h
drivers/SpiNorFlash.h
drivers/SpiMaster.h
drivers/Spi.h
drivers/Watchdog.h
drivers/DebugPins.h
drivers/InternalFlash.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
drivers/Hrs3300.h
DRAFT: Put gpio pins to separate file
2021-08-02 15:37:48 -04:00
drivers/PinMap.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.h
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/battery/BatteryController.h
components/ble/BleController.h
components/ble/NotificationManager.h
components/datetime/DateTimeController.h
components/brightness/BrightnessController.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.h
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/firmwarevalidator/FirmwareValidator.h
components/ble/BleController.h
components/ble/NotificationManager.h
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/NimbleController.h
components/ble/DeviceInformationService.h
components/ble/CurrentTimeClient.h
components/ble/AlertNotificationClient.h
components/ble/DfuService.h
components/firmwarevalidator/FirmwareValidator.h
components/ble/BatteryInformationService.h
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.h
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/ImmediateAlertService.h
Refactoring of BLE service discovery : it is now implemented into the classes of the services.
2020-10-29 11:06:01 -04:00
components/ble/ServiceDiscovery.h
components/ble/BleClient.h
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/ble/HeartRateService.h
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.h
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/ble/weather/WeatherService.h
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/settings/Settings.h
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.h
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/Cst816s.h
FreeRTOS/portmacro.h
FreeRTOS/portmacro_cmsis.h
libs/date/includes/date/tz.h
libs/date/includes/date/chrono_io.h
libs/date/includes/date/date.h
libs/date/includes/date/islamic.h
libs/date/includes/date/iso_week.h
libs/date/includes/date/julian.h
libs/date/includes/date/ptz.h
libs/date/includes/date/tz_private.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/LittleVgl.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
displayapp/lv_pinetime_theme.h
Renamed SystemTask/ to systemtask/
2020-10-02 14:45:21 -04:00
systemtask/SystemTask.h
systemtask/SystemMonitor.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Symbols.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/TwiMaster.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
heartratetask/HeartRateTask.h
components/heartrate/Ppg.h
components/heartrate/Biquad.h
components/heartrate/Ptagc.h
components/heartrate/HeartRateController.h
fis merge conflict?
2021-01-23 16:12:06 -05:00
components/motor/MotorController.h
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.h
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Improve power consumption and SLEEP mode : - Disable IDLE hook (it would wake the device up as soon as possible). - Logger task sleep for 100ms (disable logging for better battery life) - Logging is disabled by default - Apply fix for ERRATA 87 (clear FPU interrupt before going to sleep). Ports files from FreeRTOS are now in the sources (they where in the SDK before)
2020-01-05 05:09:07 -05:00
include_directories(
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
.
../
libs/
FreeRTOS/
libs/date/includes
libs/mynewt-nimble/porting/npl/freertos/include
libs/mynewt-nimble/nimble/include
libs/mynewt-nimble/porting/nimble/include
libs/mynewt-nimble/nimble/host/include
libs/mynewt-nimble/nimble/controller/include
libs/mynewt-nimble/nimble/transport/ram/include
libs/mynewt-nimble/nimble/drivers/nrf52/include
libs/mynewt-nimble/ext/tinycrypt/include
libs/mynewt-nimble/nimble/host/services/gap/include
libs/mynewt-nimble/nimble/host/services/gatt/include
libs/mynewt-nimble/nimble/host/util/include
libs/mynewt-nimble/nimble/host/store/ram/include
"${NRF5_SDK_PATH}/components/drivers_nrf/nrf_soc_nosd"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/components"
"${NRF5_SDK_PATH}/components/boards"
"${NRF5_SDK_PATH}/components/softdevice/common"
"${NRF5_SDK_PATH}/integration/nrfx"
"${NRF5_SDK_PATH}/integration/nrfx/legacy"
"${NRF5_SDK_PATH}/modules/nrfx"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/include"
"${NRF5_SDK_PATH}/modules/nrfx/hal"
"${NRF5_SDK_PATH}/modules/nrfx/mdk"
Update CMakeLists.txt
2021-01-30 12:11:07 -05:00
"${NRF5_SDK_PATH}/external/freertos/source/include"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/components/toolchain/cmsis/include"
"${NRF5_SDK_PATH}/components/libraries/atomic"
"${NRF5_SDK_PATH}/components/libraries/atomic_fifo"
"${NRF5_SDK_PATH}/components/libraries/atomic_flags"
"${NRF5_SDK_PATH}/components/libraries/balloc"
"${NRF5_SDK_PATH}/components/libraries/bootloader/ble_dfu"
"${NRF5_SDK_PATH}/components/libraries/cli"
"${NRF5_SDK_PATH}/components/libraries/crc16"
"${NRF5_SDK_PATH}/components/libraries/crc32"
"${NRF5_SDK_PATH}/components/libraries/crypto"
"${NRF5_SDK_PATH}/components/libraries/csense"
"${NRF5_SDK_PATH}/components/libraries/csense_drv"
"${NRF5_SDK_PATH}/components/libraries/delay"
"${NRF5_SDK_PATH}/components/libraries/ecc"
"${NRF5_SDK_PATH}/components/libraries/experimental_section_vars"
"${NRF5_SDK_PATH}/components/libraries/experimental_task_manager"
"${NRF5_SDK_PATH}/components/libraries/fds"
"${NRF5_SDK_PATH}/components/libraries/fstorage"
"${NRF5_SDK_PATH}/components/libraries/gfx"
"${NRF5_SDK_PATH}/components/libraries/gpiote"
"${NRF5_SDK_PATH}/components/libraries/hardfault"
"${NRF5_SDK_PATH}/components/libraries/hci"
"${NRF5_SDK_PATH}/components/libraries/led_softblink"
"${NRF5_SDK_PATH}/components/libraries/log"
"${NRF5_SDK_PATH}/components/libraries/log/src"
"${NRF5_SDK_PATH}/components/libraries/low_power_pwm"
"${NRF5_SDK_PATH}/components/libraries/mem_manager"
"${NRF5_SDK_PATH}/components/libraries/memobj"
"${NRF5_SDK_PATH}/components/libraries/mpu"
"${NRF5_SDK_PATH}/components/libraries/mutex"
"${NRF5_SDK_PATH}/components/libraries/pwm"
"${NRF5_SDK_PATH}/components/libraries/pwr_mgmt"
"${NRF5_SDK_PATH}/components/libraries/queue"
"${NRF5_SDK_PATH}/components/libraries/ringbuf"
"${NRF5_SDK_PATH}/components/libraries/scheduler"
"${NRF5_SDK_PATH}/components/libraries/sdcard"
"${NRF5_SDK_PATH}/components/libraries/slip"
"${NRF5_SDK_PATH}/components/libraries/sortlist"
"${NRF5_SDK_PATH}/components/libraries/spi_mngr"
"${NRF5_SDK_PATH}/components/libraries/stack_guard"
"${NRF5_SDK_PATH}/components/libraries/strerror"
"${NRF5_SDK_PATH}/components/libraries/svc"
"${NRF5_SDK_PATH}/components/libraries/timer"
"${NRF5_SDK_PATH}/components/libraries/usbd"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/audio"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/cdc"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/cdc/acm"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/generic"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/kbd"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/mouse"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/msc"
"${NRF5_SDK_PATH}/components/libraries/util"
"${NRF5_SDK_PATH}/external/segger_rtt/"
"${NRF5_SDK_PATH}/external/fprintf/"
"${NRF5_SDK_PATH}/external/thedotfactory_fonts"
"${NRF5_SDK_PATH}/components/libraries/gpiote"
Initial commit
2019-11-17 14:47:04 -05:00
)
Fix link error because of missing file "nrf_common.ld"
2020-01-12 10:26:20 -05:00
link_directories(
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
../
Fix link error because of missing file "nrf_common.ld"
2020-01-12 10:26:20 -05:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Few formatting fixes
2021-06-24 19:52:59 -04:00
set(COMMON_FLAGS -MP -MD -mthumb -mabi=aapcs -Wall -Wextra -Warray-bounds=2 -Wformat=2 -Wformat-overflow=2 -Wformat-truncation=2 -Wformat-nonliteral -ftree-vrp -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unknown-pragmas -Wno-expansion-to-defined -g3 -ffunction-sections -fdata-sections -fno-strict-aliasing -fno-builtin --short-enums -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wreturn-type -Werror=return-type -fstack-usage -fno-exceptions -fno-non-call-exceptions)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
add_definitions(-DCONFIG_GPIO_AS_PINRESET)
add_definitions(-DNIMBLE_CFG_CONTROLLER)
add_definitions(-DOS_CPUTIME_FREQ)
add_definitions(-DNRF52 -DNRF52832 -DNRF52832_XXAA -DNRF52_PAN_74 -DNRF52_PAN_64 -DNRF52_PAN_12 -DNRF52_PAN_58 -DNRF52_PAN_54 -DNRF52_PAN_31 -DNRF52_PAN_51 -DNRF52_PAN_36 -DNRF52_PAN_15 -DNRF52_PAN_20 -DNRF52_PAN_55 -DBOARD_PCA10040)
add_definitions(-DFREERTOS)
Initialize SystemTask, DisplayApp and HeartRateTask as global static variable instead of variables on the heap. We don't need them on the heap as we know their size at build time, it'll reduce memory fragmentation and it'll make memory analysis easier.
2021-06-06 09:56:03 -04:00
add_definitions(-D__STACK_SIZE=1024)
add_definitions(-D__HEAP_SIZE=4096)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Remove debug defines (DEBUG & DEBUG_NRF_USER) from the build. These debug can be useful for debugging purposes but not in production (release). (#400) This reduces the size of the binary by about 6KB! This also removes filepath that were embedded into the binary (.bin) file.
2021-06-01 15:02:15 -04:00
# NOTE : Add the following defines to enable debug mode of the NRF SDK:
#add_definitions(-DDEBUG)
#add_definitions(-DDEBUG_NRF_USER)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (NOT CMAKE_BUILD_TYPE)
set(CMAKE_BUILD_TYPE "Release")
endif ()
Fix builds that do not specify CMAKE_BUILD_TYPE during CMake generation. Apply Release by default.
2020-06-16 15:02:03 -04:00
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# NRF SDK
add_library(nrf-sdk STATIC ${SDK_SOURCE_FILES})
target_include_directories(nrf-sdk SYSTEM PUBLIC . ../)
target_include_directories(nrf-sdk SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(nrf-sdk PRIVATE
Few formatting fixes
2021-06-24 19:52:59 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -O3>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -Og -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -O3 -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# NimBLE
add_library(nimble STATIC ${NIMBLE_SRC} ${TINYCRYPT_SRC})
target_include_directories(nimble SYSTEM PUBLIC . ../)
target_include_directories(nimble SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(nimble PRIVATE
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -Wno-unused-but-set-variable -Wno-maybe-uninitialized>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -Wno-unused-but-set-variable -Wno-maybe-uninitialized>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -Wno-unused-but-set-variable -Wno-maybe-uninitialized -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -Wno-unused-but-set-variable -Wno-maybe-uninitialized -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# lvgl
add_library(lvgl STATIC ${LVGL_SRC})
target_include_directories(lvgl SYSTEM PUBLIC . ../)
target_include_directories(lvgl SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(lvgl PRIVATE
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
# QCBOR
add_library(QCBOR STATIC ${QCBOR_SRC})
target_include_directories(QCBOR SYSTEM PUBLIC libs/QCBOR/inc)
# This is required with the current configuration
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_FLOAT_HW_USE)
# These are for space-saving
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_PREFERRED_FLOAT)
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_EXP_AND_MANTISSA)
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_INDEFINITE_LENGTH_STRINGS)
Improved error handling and fixed incompatibility with co.nstant.in:cbor library
2021-11-28 13:58:28 -05:00
#target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_INDEFINITE_LENGTH_ARRAYS)
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_UNCOMMON_TAGS)
Fixed a few bugs, enabled UsefulBuf library optimizations
2021-06-20 14:37:53 -04:00
target_compile_definitions(QCBOR PUBLIC USEFULBUF_CONFIG_LITTLE_ENDIAN)
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
set_target_properties(QCBOR PROPERTIES LINKER_LANGUAGE C)
target_compile_options(QCBOR PRIVATE
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -O0 -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -O3>
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
)
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
# LITTLEFS_SRC
add_library(littlefs STATIC ${LITTLEFS_SRC})
target_include_directories(littlefs SYSTEM PUBLIC . ../)
target_include_directories(littlefs SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(littlefs PRIVATE
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-unused-function -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-unused-function -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-unused-function -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-unused-function -Os -fno-rtti>
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Build autonomous binary (without support for bootloader)
set(EXECUTABLE_NAME "pinetime-app")
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
set(EXECUTABLE_FILE_NAME ${EXECUTABLE_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(NRF5_LINKER_SCRIPT "${CMAKE_SOURCE_DIR}/gcc_nrf52.ld")
add_executable(${EXECUTABLE_NAME} ${SOURCE_FILES})
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
set_target_properties(${EXECUTABLE_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_FILE_NAME})
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
target_link_libraries(${EXECUTABLE_NAME} nimble nrf-sdk lvgl littlefs QCBOR)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
target_compile_options(${EXECUTABLE_NAME} PUBLIC
Improved error handling and fixed incompatibility with co.nstant.in:cbor library
2021-11-28 13:58:28 -05:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Og -g3 -fno-rtti>
Removed unnecessary change in CMakeLists
2021-12-01 11:43:23 -05:00
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set_target_properties(${EXECUTABLE_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_FILE_NAME}.map"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
add_custom_command(TARGET ${EXECUTABLE_NAME}
POST_BUILD
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_FILE_NAME}.out "${EXECUTABLE_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_FILE_NAME}.out "${EXECUTABLE_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_FILE_NAME}")
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Build binary intended to be used by bootloader
set(EXECUTABLE_MCUBOOT_NAME "pinetime-mcuboot-app")
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
set(EXECUTABLE_MCUBOOT_FILE_NAME ${EXECUTABLE_MCUBOOT_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set(IMAGE_MCUBOOT_FILE_NAME ${EXECUTABLE_MCUBOOT_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.bin)
set(DFU_MCUBOOT_FILE_NAME ${EXECUTABLE_MCUBOOT_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(NRF5_LINKER_SCRIPT_MCUBOOT "${CMAKE_SOURCE_DIR}/gcc_nrf52-mcuboot.ld")
add_executable(${EXECUTABLE_MCUBOOT_NAME} ${SOURCE_FILES})
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
target_link_libraries(${EXECUTABLE_MCUBOOT_NAME} nimble nrf-sdk lvgl littlefs QCBOR)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
set_target_properties(${EXECUTABLE_MCUBOOT_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_MCUBOOT_FILE_NAME})
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
target_compile_options(${EXECUTABLE_MCUBOOT_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
set_target_properties(${EXECUTABLE_MCUBOOT_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT_MCUBOOT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_MCUBOOT_FILE_NAME}.map"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
POST_BUILD
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_MCUBOOT_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_FILE_NAME}.hex"
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_MCUBOOT_FILE_NAME}.bin ${IMAGE_MCUBOOT_FILE_NAME}
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMENT "post build steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
POST_BUILD
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_FILE_NAME} ${DFU_MCUBOOT_FILE_NAME}
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
)
endif()
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# InfiniTime recovery firmware (autonomous)
set(EXECUTABLE_RECOVERY_NAME "pinetime-recovery")
set(EXECUTABLE_RECOVERY_FILE_NAME ${EXECUTABLE_RECOVERY_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
add_executable(${EXECUTABLE_RECOVERY_NAME} ${RECOVERY_SOURCE_FILES})
Fixed recovery build
2021-11-28 12:13:28 -05:00
target_link_libraries(${EXECUTABLE_RECOVERY_NAME} nimble nrf-sdk littlefs QCBOR)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERY_FILE_NAME})
target_compile_definitions(${EXECUTABLE_RECOVERY_NAME} PUBLIC "PINETIME_IS_RECOVERY")
target_compile_options(${EXECUTABLE_RECOVERY_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_NAME} PROPERTIES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_RECOVERY_FILE_NAME}.map"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERY_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERY_FILE_NAME}.out "${EXECUTABLE_RECOVERY_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERY_FILE_NAME}.out "${EXECUTABLE_RECOVERY_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_RECOVERY_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# InfiniTime recovery firmware (mcuboot)
set(EXECUTABLE_RECOVERY_MCUBOOT_NAME "pinetime-mcuboot-recovery")
set(EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
set(IMAGE_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.bin)
set(DFU_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
add_executable(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} ${RECOVERY_SOURCE_FILES})
Added QCBOR to pinetime-mcuboot-recovery
2021-12-09 15:56:37 -05:00
target_link_libraries(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} nimble nrf-sdk littlefs QCBOR)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME})
target_compile_definitions(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PUBLIC "PINETIME_IS_RECOVERY")
target_compile_options(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PROPERTIES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_GRAPHICS_FILE_NAME}.map"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_RECOVERYY_MCUBOOT_FILE_NAME}.hex"
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.bin ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME}
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
COMMAND python3 ${CMAKE_SOURCE_DIR}/tools/bin2c.py ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME} recoveryImage > recoveryImage.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMENT "post build steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
POST_BUILD
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME} ${DFU_RECOVERY_MCUBOOT_FILE_NAME}
COMMENT "post build (DFU) steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
)
endif()
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# Build binary that writes the recovery image into the SPI flash memory
set(EXECUTABLE_RECOVERYLOADER_NAME "pinetime-recovery-loader")
set(EXECUTABLE_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_RECOVERYLOADER_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
add_executable(${EXECUTABLE_RECOVERYLOADER_NAME} ${RECOVERYLOADER_SOURCE_FILES})
Hotfix for other build targets
2021-12-09 15:51:42 -05:00
target_link_libraries(${EXECUTABLE_RECOVERYLOADER_NAME} nrf-sdk QCBOR)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERYLOADER_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERYLOADER_FILE_NAME})
target_compile_options(${EXECUTABLE_RECOVERYLOADER_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
target_include_directories(${EXECUTABLE_RECOVERYLOADER_NAME} PUBLIC
$<BUILD_INTERFACE:${CMAKE_BINARY_DIR}/src>
)
add_dependencies(${EXECUTABLE_RECOVERYLOADER_NAME} ${EXECUTABLE_RECOVERY_MCUBOOT_NAME})
set_target_properties(${EXECUTABLE_RECOVERYLOADER_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.map"
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
add_custom_command(TARGET ${EXECUTABLE_RECOVERYLOADER_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# Build binary that writes the recovery image (MCUBoot version)
set(EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME "pinetime-mcuboot-recovery-loader")
set(EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
set(IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.bin)
set(DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
add_executable(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} ${RECOVERYLOADER_SOURCE_FILES})
Hotfix for other build targets
2021-12-09 15:51:42 -05:00
target_link_libraries(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} nrf-sdk QCBOR)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME})
target_compile_options(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
target_include_directories(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PUBLIC
$<BUILD_INTERFACE:${CMAKE_BINARY_DIR}/src>
)
add_dependencies(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} ${EXECUTABLE_RECOVERY_MCUBOOT_NAME})
set_target_properties(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -std=gnu++98 -std=c99 -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT_MCUBOOT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.map"
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
POST_BUILD
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.hex"
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.bin ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME}
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
COMMAND python3 ${CMAKE_SOURCE_DIR}/tools/bin2c.py ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME} recoveryLoaderImage > recoveryLoaderImage.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMENT "post build steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
)
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
POST_BUILD
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME} ${DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME}
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
)
endif()
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# FLASH
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (USE_JLINK)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
add_custom_target(FLASH_ERASE
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
Flash the correct file when running FLASH_pinetime-app with JLink
2020-11-14 19:23:16 -05:00
COMMAND ${NRFJPROG} --program ${EXECUTABLE_FILE_NAME}.hex -f ${NRF_TARGET} --sectorerase
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
COMMAND sleep 0.5s
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
Flash correct file name
2021-02-19 13:44:51 -05:00
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
elseif (USE_GDB_CLIENT)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
add_custom_target(FLASH_ERASE
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
Flash correct file name
2021-02-19 13:44:51 -05:00
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_FILE_NAME}.hex
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
elseif (USE_OPENOCD)
if (USE_CMSIS_DAP)
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -c 'source [find interface/cmsis-dap.cfg]' -c 'transport select swd'
-c 'source [find target/nrf52.cfg]'
-c 'init'
-c 'halt'
-c 'nrf5 mass_erase'
-c 'halt'
-c 'reset'
-c 'exit'
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${OPENOCD_BIN_PATH}
-c 'tcl_port disabled'
-c 'gdb_port 3333'
-c 'telnet_port 4444'
-c 'source [find interface/cmsis-dap.cfg]'
-c 'transport select swd'
-c 'source [find target/nrf52.cfg]'
-c 'halt'
Flash correct file name
2021-02-19 13:44:51 -05:00
-c "program \"${EXECUTABLE_FILE_NAME}.hex\""
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
-c 'reset'
-c 'shutdown'
Flash correct file name
2021-02-19 13:44:51 -05:00
COMMENT "flashing ${EXECUTABLE_BIN_NAME}.hex"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
else ()
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
Flash correct file name
2021-02-19 13:44:51 -05:00
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_FILE_NAME}.hex\"" -c reset -c shutdown
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
endif ()
Few formatting fixes
2021-06-24 19:52:59 -04:00
endif ()
Reference in a new issue Copy permalink